Maintenance And Cleaning; After-Sales Service And Application Service - Bosch GLM 30 Original Instructions Manual

OBJ_BUCH-2099-004.book Page 14 Thursday, April 21, 2016 1:10 PM
14 | English
Cause
The indication remains unchanged or the measuring tool reacts unexpectedly
after pressing a button
Software error
The measuring tool monitors the proper function for each measurement. When a de-
fect is detected, all indicators on the display flash. In this case, or when the corrective
measures listed above cannot correct the error, have your dealer forward the meas-
uring tool to an authorised Bosch after-sales service.
Maintenance and Service

Maintenance and Cleaning

Keep the measuring tool clean at all times.
Do not immerse the measuring tool in water or other fluids.
Wipe off debris using a moist and soft cloth. Do not use any cleaning agents or sol-
vents.
Maintain the reception lens 7 in particular, with the same care as required for eye
glasses or the lens of a camera.
If the measuring tool should fail despite the care taken in manufacturing and testing
procedures, repair should be carried out by an authorised after-sales service centre
for Bosch power tools. Do not open the measuring tool yourself.

After-sales Service and Application Service

Our after-sales service responds to your questions concerning maintenance and re-
pair of your product as well as spare parts. Exploded views and information on spare
parts can also be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions concerning our prod-
ucts and their accessories.
In all correspondence and spare parts orders, please always include the 10-digit arti-
cle number given on the nameplate of the product.
1 609 92A 297 | (21.4.16)
Corrective Measure
Remove the batteries and start the meas-
uring tool again after reinserting them.
Bosch Power Tools