Auxiliary Driving Systems - Alfa Romeo Stelvio User Manual

Hide thumbs Also See for Stelvio:
Table of Contents

Advertisement

Once the desired speed has been
reached, release the SET switch and the
HDC system will maintain the set speed.
After set speed is established, the HDC
system will automatically brake to keep
the vehicle at the set speed if the
accelerator pedal is released and the
vehicle gets close to the set speed.
It is possible to reduce the set speed with
the brake pedal. When the pedal is
released, the system will adjust the set
speed to the new current speed.
Note:
Vehicle set speed can only be set while
traveling between 4 mph (6 km/h) and
13 mph (25 km/h), and the feature will
only apply to a set speed placed in the
range of 6 mph (10 km/h) to 37 mph
(60 km/h).
The driver can cancel HDC system
intervention at any time by pressing the
accelerator pedal.
76
System Deactivation
The HDC system will be deactivated, but
remain available, if any of the following
conditions are met:
The vehicle is traveling on a downhill
slope with a gradient less than 10%, on a
level surface, or on an uphill grade.
PARK (P) mode is engaged.
Disabling The System
The system is disabled if any of the
following conditions are met:
The HDC switch is pressed.
Cruise Control / Active Cruise Control
is activated.
A vehicle speed of 37 mph (60 km/h) is
exceeded.
System deactivation is shown by the icon
on the display turning off.
Warning!
HDC is only intended to assist the driver in
controlling vehicle speed when descending
hills. The driver must remain attentive to the
driving conditions and is responsible for
maintaining a safe vehicle speed.

AUXILIARY DRIVING SYSTEMS

The following auxiliary driving systems
are available in this vehicle:
Blind Spot Monitoring (BSM) — If
Equipped
Forward Collision Warning Plus
(FCW+) — If Equipped
Tire Pressure Monitoring System
(TPMS)
Blind Spot Monitoring (BSM) System
— If Equipped
The Blind Spot Monitoring (BSM) system
uses two radar sensors, located in the
rear bumper (one on each side), to detect
the presence of other vehicles in the rear
side blind spots of your vehicle.
Rear Sensor Location

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stelvio 2018

Table of Contents