GE 339 Instruction Manual page 17

CHAPTER 1: INTRODUCTION
NOTE:
NOTE
FASTPATH:
339
Phase Currents
Ground Currents
Other Options
Communications
Harsh Environment
a. Ground current options “G1/G5” must match the corresponding “P1/P5” Phase currents
NOTE:
NOTE
339 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL
The chassis order code and drawout relay order code must match exactly.
A drawout relay cannot be used in a chassis with different order code options.
Figure 1-4: 350 chassis order codes
– * * S N *
– CH
P1 | |
P5 | |
a G1 |
G5 |
N
M
P
Remote Module I/O
The remote RTD Module provides additional protection.
RMIO – * G G
Power Supply L |
H |
I/O Module 1 G
I/O Module 2
a
I/O Module 3
I/O Module 4
a. RMIO comes standard with 6 RTDs (Modules 1 and 2). The 9 and 12 RTD options (Modules 3 and 4)
require firmware 1.40 or greater.
Other Accessories
• 18L0-0075 3 Series Depth reducing collar - 1.375"
• 18L0-0076 3 Series Depth reducing collar - 3.00"
• 18L0-0080 3 Series IP20 Kit
• 3S-NDO-STCONKIT 3 Series NDO straight terminal block kit
• 0804-0458 USB A-B configuration cable - 6'
Refer to the 3 Series Retrofit Instruction Manual for the retrofit of Multilin MI, MII, MLJ, and
TOV relays.
* * *
| | | 1 A 3-phase current inputs
| | | 5 A 3-phase current inputs
| | | 1 A ground current input
| | | 5 A ground current input
| | | No Selection
| | | Voltage, Power, Energy Metering, VTFF (1), 60CTS
| | | Voltage Protection: 37P, 27P(2), 27P_1(2), 47(1), VTFF(1),
| | | 59P(2), 81O(2), 81U(2), 59_2(1), 67N(1), 32(2), 60CTS
| Standard: Front USB, Rear RS485: Modbus RTU, DNP3.0,
S N
| IEC60870-5-103
| Standard + Ethernet (Copper + Fiber - MTRJ) Modbus TCP/IP,
1 E
| DNP3.0, IEC 60870-5-104
| Standard + Ethernet (Copper + Fiber - MTRJ) Modbus TCP/IP,
2 E
| DNP3.0, IEC 60870-5-104, IEC 61850 GOOSE
| Standard + Ethernet (Copper + Fiber - MTRJ) Modbus TCP/IP,
3 E
| DNP3.0, IEC 60870-5-104, IEC 61850
N None
H Harsh Environment Conformal Coating
* *
| | | 24 - 48 V DC
| | | 110 - 250 V DC / 110 - 230 V AC
| | | Remote Module I/O (3 - 100 Ohm Platinum RTDs)
G | | Remote Module I/O (3 - 100 Ohm Platinum RTDs)
G | Remote Module I/O (3 - 100 Ohm Platinum RTDs)
X | None
G Remote Module I/O (3 - 100 Ohm Platinum RTDs)
X None
339 ORDER CODES
896800CH-A1.fm
896800RMIO-A1.fm
1–7