Hitachi C11XMB Service Manual page 39

4. Putting the power supply unit together after the maintenance of the POWER UNIT (CIRCUIT) and/or the
POWER UNIT (BALLAST).
Assemble the power supply unit with care to achieve the required insulation. Incor-
rect assembly could cause a fi re and/or an electric shock.
Warning
Attach Power Sheet so that its
shaded edge is inserted between
POWER UNIT(CIRCUIT) and the
bracket correctly.
5. Caution when connecting flexible flat cables of LCD panels.
A connector P601 on the PWB assembly MAIN is different from P501 and P701. Insert a cable correctly
and tighten firmly.
P601
CP-X444(C11XMB)/CP-X440(C11XM25)
WARNING
Power sheet
Bracket
Cable of LCD panel
39
POWER UNIT(CIRCUIT)
Power PWB Holder
P501,P701
Cable of LCD panel