Cobra 29 NW Manual page 2

Installation
Location
Location
Plan location of transceiver and microphone
bracket before starting the installation.
Select a location that is convenient for operation,
yet does not interfere with the driver or passenger.
The transceiver is usually mounted to the
underside of the dash with the microphone
bracket beside it.
Mounting and
Mounting and Connection
Connection
Hold the radio with the mounting bracket in
1
the exact desired location. If there is no
interference, remove the bracket and use it as
Note
a template to mark the location for the
The transceiver is held in the
mounting screws.
universal mounting bracket
by two thumbscrews which
allow for adjustment at a
convenient angle.
The bracket includes two
self-tapping screws and star
washers. The mounting
must be mechanically strong,
conveniently located.
Drill the holes and secure the bracket.
2
2
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
DATE OF
ANT
MFG :JUNE 98 FCC ID:BBO3K229LTD
COBRA
MADE IN CHINA
SERIAL NO.:806135776
PRECISION ENGINEERED PRODUCT OF
COBRA ELECTRONICS CORP. CHICAGO, ILL.60707
3 Connect the antenna cable plug to the
receptacle marked "ANT" on the back
of the unit.
Installation
PA.SP. EXT.SP.
+ –
POWER
continued
3