Table of Contents
Advertisement
B9. CHANGE GEAR OIL IN TRANSFER
CASE (4WD)
Drain plug
1. Remove the filler plug.
2. Remove the drain plug and drain the oil.
3. Tighten the drain plug to the specified torque.
Tightening torque: 32 ± 2 N⋅ m
4. Fill with specified oil till the level comes to the
lower portion of oil filler plug hole.
Specified transfer oil:
Gear oil API classification GL-4 SAE 75W−
85W
Quantity: 2.8 L
5. Tighten the oil filler plug to the specified torque.
Tightening torque: 32 ± 2 N⋅ m
B10. CHECK GEAR OIL LEVEL IN FRONT
AND REAR DIFFERENTIAL
FRONT DIFFERENTIAL
1. Remove the under cover and filler plug.
Gear oil
Upper
8 mm
limit
Lower
limit
2. Check that gear oil level is not 8 mm below the
bottom of filler plug hole
3. Tighten the filler plug to the specified torque.
Tightening torque : 50 ± 10 N⋅ m
REAR DIFFERENTIAL
1. Remove the filler plug.
PERIODIC INSPECTION AND MAINTENANCE
OPERATIONS UNDER THE VEHICLE
M6020300900252
Filler plug
AC604828AB
M6020301000315
AC102739 AB
Gear oil
Upper
limit
Lower
5 mm
limit
2. Check that gear oil level is not 5 mm below the
bottom of filler plug hole.
3. Tighten the filler plug to the specified torque.
Tightening torque : 50 ± 10 N⋅ m
B11. CHANGE GEAR OIL IN FRONT AND
REAR DIFFERENTIAL
<Front>
Filler plug
Drain plug
FRONT DIFFERENTIAL
1. Remove the under cover and filler plug.
2. Remove the drain plug and drain oil.
3. Tighten the drain plug to the specified torque
Tightening torque : 65 ± 5 N⋅ m
4. Add the oil until the level comes to the lower
portion of the filler plug hole.
Specified lubricant:
Gear oil API classification GL-5 or higher
Above 10° C: SAE 90
Below 10° C: SAE 80W
Quantity: 1.15 L
5. Tighten the filler plug to the specified torque.
Tightening torque : 50 ± 10 N⋅ m
REAR DIFFERENTIAL
1. Remove the filler plug.
2. Remove the drain plug and drain oil.
3. Tighten the drain plug to the specified torque.
Tightening torque : 65 ± 5 N⋅ m
2-27
AC102739 AG
M6020301100356
<Rear>
Filler plug
Drain plug
AC608839
AB
Advertisement
Chapters
Table of Contents
