GE GTUP270EMWW Technical Service Manual page 52

10. Remove the 4 Phillips-head screws on each side
of the frame. Lift and remove the frame.
11. Move the outer tub to the rear of the machine at
the bottom and tilt it forward to access the rear
support rods.
12. Once the outer tub is tilted forward; reach in at
the rear and push the rear suspension rods out
of the tub slots to release.
Left Rear Suspension Rod
Right Rear Suspension Rod
13. Lift and remove the tub assembly from the
cabinet and place it on a protected surface.
– 52 –