Table of Contents
Advertisement
8 Adjust settings
1
Press .
2
Select the [Setup] page.
3
Select a setting and press OK.
•
To return to the previous menu, press
BACK.
•
To exit the menu, press .
General setup
On the [General] (general) page, you can set
the following options:
[Disc Lock]
Before you start, place the disc in the disc
compartment (maximum 20 discs can be
locked).
•
[Lock] – Restricts access to the current
disc. Once activated, a password is needed
to unlock and play the disc.
•
[Unlock] – Plays all discs.
Tip
•
You can set or change the password.
[Display Dim]
Changes the brightness level of the display
panel on the unit.
•
[100%] – Normal brightness.
[70%] – Medium brightness.
•
•
[40%] – Dimmest display.
[OSD Language]
Selects the default on-screen menu language.
[Sleep Timer]
Switches to standby automatically after the
preset time.
•
[15 mins], [30 mins], [45 mins], [60 mins]
– Selects the count down time before the
unit switches to standby.
•
[Off] – Disables sleep timer mode.
[Auto Standby] (only available for DISC and
USB mode)
Turns off or on automatic standby switching
mode. It is an energy saving feature.
•
[On] – Switches to standby after 15
minutes of inactivity (for example, in pause
or stop mode).
•
[Off] – Disables auto standby mode.
Displays the DivX® registration code.
Tip
•
Enter the DivX registration code of the unit when you
rent or purchase video from www.divx.com/vod. The
DivX videos rented or purchased through the DivX®
VOD (Video On Demand) service can be played only
on the device to which it is registered.
Video setup
On the [Video] (Video) page, you can set the
following options:
[TV System]
Changes this setting if the video does not
appear correctly. By default, this setting matches
the most common setting for TVs in your
country.
[PAL] – For PAL-system TV.
•
•
[NTSC] – For NTSC-system TV.
EN
23
Advertisement
Table of Contents
