Visual Alerting; Placing A Call On Hold And Resuming The Call; Activating Transfer To Voice Mail - Avaya J129 Using Manual

Using call related features
4. Press Save.
Mute alert turns off automatically when you take the call off mute.

Visual alerting

The beacon LED works in the following manner to indicate incoming calls and messages:
• If there is an incoming call, the beacon LED blinks.
• If there are new voice mail messages, the beacon LED is lit continuously.
• If the speaker is on during an active call and there are new voice mail messages, the beacon
LED turns off every 15 seconds.
• If the speaker is on during an active call and there are no voice mail messages, the beacon
LED turns on every 15 seconds.
Note:
• When the call is on speaker, the speaker icon ( ) replaces the active call handset ( )
icon.
• If the call is on hold, the beacon LED stops flashing.
Related links
Setting Visual alerting

Placing a call on hold and resuming the call

Procedure
1. To put an active call on hold, press Hold.
2. To resume the call, press Resume or OK.

Activating transfer to voice mail

About this task
Use this procedure to transfer an active call to voice mail.
Before you begin
Your system administrator must activate the feature for your extension.
This feature is only available in the Avaya Aura
March 2017
on page 44
Using Avaya J129 IP Phone
Comments on this document? infodev@avaya.com
®
environment.
36