Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for TEFAL DR80XX
Summary of Contents for TEFAL DR80XX
- Page 1 Access Steam DR80XX www.tefal.com...
- Page 2 * EN Depending on model...
-
Page 3: Product Description
PRODUCT DESCRIPTION On/Off button Standing base Steam head Removable water tank Hanging hook Cord exit Lock position Fabric brush for continuous steam 10*. Steam cover Steam trigger 11*. Door hook * EN Depending on model... -
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When using your appliance, basic precautions should always be followed, including the following: • Read all instructions before using this product. • This product has been designed for indoor, domestic use only. Any commercial use, inappropriate use or failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee will not apply. - Page 5 To avoid the risk of electric shock, do not disassemble or attempt to repair the appliance. Take it to the nearest Tefal approved service centre for examination and repair. Incorrect reassembly or repair could cause a risk of fire, electrical shock or injury to persons when the appliance is used.
- Page 6 • Do not leave the appliance unattended while plugged in or while it is still hot. • Burns could occur from touching hot metal or plastic parts, hot water or steam. Use care when you empty a steam appliance. There may be hot water in the reservoir.
- Page 7 • The use of accessory attachments other than those provided by *Tefal is not recommended and may result in fire, electric shock or personal injury. • The appliance must be rested on a stable surface.
-
Page 8: Before Use
BEFORE USE During the first few uses, the appliance may produce smoke, a harmless odour and a light emission of particles. These are simply the engineering residues from the manufacturing process burning off. These are harmless and will quickly disappear. Remove the water tank. - Page 9 200 ml Fill the water tank with a maximum of 200 ml of untreated tap water. Close the water inlet stopper. Tips: Check the fabric’s label for recommendations. We recommende that you test acrylic, nylon or other synthetic fabrics in an inconspicuous area to ensure these fabrics are not damaged by hot steam.
- Page 10 ACCESSORIES The door hook allows to hang your garment for steaming. The fabric brush opens the weaves of the fabrics for better steam penetration. Before removing or attaching the steam brush, unplug your appliance and allow it to cool down, for one hour. The steam cover filters water impurities and protects fabrics from water drips.
- Page 11 Switch on the appliance. Wait until the light stops flashing (approximately 45 seconds). When the light is steady the appliance is ready to use. Press the steam button with the steam brush facing away from you holding it in a vertical position. For optimal use, pass the steam jets over your garment from top to bottom.
- Page 12 For continous steam, lock the steam trigger by pushing the switch down. if you need to refill the water tank during use, please refer to 'Before Use' Section. 3 sec. Press and hold the On/Off button for 3 seconds to switch the appliance off.
-
Page 13: After Use
AFTER USE After use or while unit is cooling down, place the product on a flat, stable, heat resistant surface. Remove the water tank. Empty the water tank completely. Return the water tank to its place on the appliance. - Page 14 EASY DESCALING We advise you to do this operation in a vented room Remove the water tank. Remove the water inlet stopper. Water Water Water Fill the water tank with 50% water and 50% white vinegar. Do not use other descaling products. White White White...
- Page 15 Plug-in the appliance. Switch on the appliance. Wait until the light stops flashing (approximately 45 seconds). When the light is steady the appliance is ready to use. Put the steam trigger in the locked position. Place the product on a flat, stable, horizontal and heat resistant surface.
- Page 16 Allow the appliance to run until the water tank has completely emptied. 3 sec. Press and hold the On/Off button for 3 seconds to switch the appliance off. Unplug the appliance and pull the water tank out. 200 ml Remove the water inlet stopper and fill the water tank with a maximum of 200 ml of untreated tap water.
- Page 17 Return the water tank to its place on the appliance. Make sure the water tank is fully set in place. Plug in the appliance. Switch on the appliance. Wait until the light stops flashing (approximately 45 seconds). When the light is steady the appliance is ready.
- Page 18 Put the steam trigger in the locked position. place the product on a flat, stable, horizontal and heat resistant surface.
-
Page 19: Standbye Mode
STANDBYE MODE 1) For your safety, the steambrush is fitted with a standby monitoring system, which is activated automatically after approximately 8 minutes without use. 2) Only the ‘On-Off ’button flashes slowly to indicate that the appliance is on standby 3) To reactivate the steambrush : a. -
Page 20: Is There A Problem
You are using other liquids than Use only white vinegar during ‘ANTI white vinegar to descale the CALC’ procedure. product. Appliance steams The steam trigger is on the lock Unlock the steam trigger. continuously. position. www.tefal.com 1800135875-02 - 40/15...