Moultrie M-Series Instructions Manual page 7

G
SETTING INFOSTRIP OPTIONS
Infostrip Active
Choose between:
YES - Camera Name, Time, etc, information will be imprinted at the bottom
of the image/video as an information bar.
Note: Remember to input the camera name in the setup and set the clock accordingly.
NO - No information bar will be imprinted.
Temperature
The temperature is imprinted on each photo and can be in degrees Fahrenheit or Celsius.
Setting Date and Time
IMPORTANT! Use to set date and time.
Setting Camera Name
Select an identity for your camera. For example, you can use a name or a location;
the identity you wish to use is up to you.
10
Event Delay Setting
Detection Delay determines the number of minutes between pictures when an
animal is detected and remains in range. Choose between (NONE, 10 sec, 30 sec,
1 min, 5min, 10min, or 30 min).
I N F O S T R I P A C T I V E
Y E S
PIR Sensitivity
PIR Sensitivity allows you to control as to how much movement and at what distance
the camera will trigger. HIGH sensitivity will allow for more distance, but will make
the camera slightly more susceptible to false triggers and is ideal for open areas such as
fields and food plots. LOW sensitivity will shorten the distance but lower the chance of
false triggers and is ideal for close range traps and deeply wooded areas.
T E M P E R A T U R E
F A H R E N H E I T
Setting Multi-Shot
Choose how many pictures you would like captured in a sequence
when the camera is triggered (1 or 3).
D A T E & T I M E
Available options are:
1 1 / 1 1 / 1 6 1 1 : 1 1 p m
1 (OFF) - Single photo taken per event.
3 BURST - Three rapidly captured photos taken per event. All 3 photos are captured within one second.
C A M E R A N A M E
3 TRIGGERED - Up to three photos are captured per event with an approximate one second delay between each capture. Each subsequent photo
M O U L T R I E C A M
after the first requires an individual trigger. This allows for multiple potential image captures of the same event while reducing the chance of
empty images if the subject moves out of the field of view after the first shot.
NOTE: Burst mode is only capable of up to 4MP captures, regardless of your resolution setting.
D E T E C T I O N D E L A Y
1 0 S E C O N D S
P I R S E N S I T I V I T Y
H I G H
M U L T I - S H O T
1 ( O F F )
7