Philips AZ2536/01 User Manual page 13

Programming tuner stations:
You can store up to a total of 30 radio stations in the memory (20 FM and 10 MW), manually or
automatically (Autostore).
Autostore
Automatic programming will start from preset 1 or a chosen preset number. The set will only program
stations which are not in the memory already.
1. Press ALBUM/PRESET -,+ (
number where programming should start.
Helpful hints:
If no tuner preset number is selected, default is preset 1 and all your presets will be erased.
–
Press PROG for 4 seconds or more to activate auto store programming.
2.
=
Display:
followed by MW , the first preset station will then be played after all stations are stored
automatically.
Manual programming
1. Tune to your desired station (see Tuning to stations).
2. Press PROG to activate programming.
= Display: PROG flashes.
ALBUM/PRESET -,+ (
3. Press
1 to 20 for FM or 1 to 10 for MW.
Press PROG again to confirm.
4.
= Display: shows the preset number, waveband and the frequency of the preset station.
5. Repeat the above four steps to store other stations.
Helpful hints:
You can erase a preset station by storing another frequency in its place.
–
To listen to a preset station
Press ALBUM/PRESET -,+ (
station is displayed.
CAUTION
Use of controls or adjustments or performance of procedures other than herein
may result in hazardous radiation exposure or other unsafe operation.
Environmental information
All unnecessary packaging material has been omitted. We have done our utmost to make the
packaging easily separable into three mono materials: cardboard, polystyrene and plastic.
Your set consists of materials which can be recycled if disassembled by a specialized
company. Please observe the local regulations regarding the disposal of packaging
materials, exhausted batteries and old equipment.
¡ ™
or on the remote control) once or more to select the preset
is shown and available stations are programmed in order of waveband FM,
¡ ™
or on the remote control) once or more to allocate a number from
¡ ™
or on the remote control) once or more until the desired preset
DIGITAL TUNER
13