How To Avoid Hand Movement; Fluorescent Lighting; Infrared Light; Shooting Images Outdoors - Casio QV-30 Owner's Manual

4.
Record the image.
• Compose the image you want to
record while viewing it on the
LCD.
• It is best to look at the LCD di-
rectly, and not from an angle.
• Take care that your finger is not
blocking the lens.
• Should the lens become dirty, use
the cloth that comes with the cam-
era to clean it off.
• When the image is situated on the
LCD as you want it, press the
shutter button.
• Press the shutter button lightly to avoid moving the camera.
See page 22 for information on how to avoid hand move-
ment.
• The message "WAIT" appears on the LCD for about six sec-
onds along with the image that was recorded when you
pressed the shutter button. You can use the camera to take
the next picture after the "WAIT" message disappears.
• Here you could change the function switch to the PLAY posi-
tion and view the image you just recorded.
Caution
• Never open the battery compartment cover, disconnect the
AC adaptor from the camera or unplug it from the wall
socket while the "WAIT" message is on the LCD. Doing so
will not only make storage of the current image impossible, it
can also corrupt other image data already stored in camera
memory.

Shooting Images Outdoors

Strong direct or reflected sunlight can cause recorded images to take
on a greenish tinge. This is due to the characteristics of the camera's
optical pickup and it does not indicate malfunction of the camera. One
way you can try to minimize this problem is to set the aperture to [●]
(F8).

Changing the Lens Orientation

The lens of the camera is built into a lens body that is designed to
rotate. This means you can change the angle of the lens without mov-
ing the rest of the camera.
Rotates up to 90 ° towards the front
Rotates up to 180 ° towards the back
Recording Images
REC
MACRO NORMAL
PLAY
21
Recording Images
23
Operation

How to avoid hand movement...

Any hand movement when you press the shutter button can causes
blurring of the recorded image. Note the following points on avoiding
hand movement.
• Make sure there is no excessive movement of the image of the ob-
ject on the LCD.
• Use a tripod whenever possible when recording images in dim light-
ing. The camera automatically adjusts shutter speed in accordance
with the brightness of the object whose image is being recorded.
Shutter speed is quite slow for dimly lit objects, increasing the pos-
sibility of blurring caused by hand movement.

Fluorescent Lighting

Fluorescent lighting actually flickers at a frequency that cannot be
detected by the human eye. When using the camera indoors under
such lighting, you may experience some brightness or color problems
with recorded images. The actual extent of the problems depends on
what cycle of the fluorescent light's flicker is occurring when the
camera's shutter actually releases. For best results, use a commer-
cially available video lights.

Infrared Light

Infrared light generated by a flash or other source can create image
color problems, such as red areas being recorded as green. Such
color problems will show up in the LCD while you are composing the
image.
22
Operation
• Any images recorded while the lens body is rotated so the lens is
pointed from the back of the camera are stored as mirror images of
the image that appears in the LCD before the shutter button is
pressed.
A A A A A
LCD when shutter button is
pressed (in the Record Mode)
B B B B B
LCD when image is played
back from camera memory
Important!
• Do not apply excessive force when rotating the lens body. Doing so
can cause serious damage to the lens.
• Do not carry the camera or move it around while holding onto only
the lens body.
• Return the lens body to its normal position (with the lens pointing
from the front of the camera) before storing the camera.
24
A A A A A
B B B B B