Sending An Emergency Alarm With Emergency Call - Motorola ASTRO APX 6000 Series Quick Reference Card

3
Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
4
Press and hold the PTT button. Speak clearly into the
microphone.
5
Release the PTT button to end the transmission and wait for
a response from the dispatcher.
6
Press and hold the preprogrammed Emergency button for
about a second to exit the Emergency Call mode.
Sending an Emergency Alarm with Emergency
Call
Procedure:
1
Press the preprogrammed Emergency button.
2
The display shows EMERGNCY and the current zone or
channel. A short, medium-pitched tone sounds and the
LED rapidly blinks red.
OR
An invalid tone sounds, if the selected channel does not
support emergency.
3
The radio enters the Emergency Call state when:
You receive the dispatcher's acknowledgment. The display
shows ACK RCVD.
OR
You press the PTT button while in the Emergency Alarm
mode.
4
Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
5
Press and hold the PTT button. Speak clearly into the
microphone.
6
Release the PTT button to end the transmission and wait for
a response from the dispatcher.
7
Press and hold the preprogrammed Emergency button for
about a second to exit the Emergency Call mode.
31
English