Table of Contents
Advertisement
SETTINGS
PROGRAMME SELECTION MODE
The appliance is in programme selection mode when the programme indicator
display shows the programme duration.
When the appliance is in programme selection mode, it is possible to set a programme and to enter the
user mode.
If the control panel does not show this condition, do the Reset function.
RESET FUNCTION
Press and hold simultaneously
With this function you can cancel the running programme or the delay start.
USER MODE
While the appliance is in programme selection mode:
1. Press and hold
•
The indicators
In user mode can be changed:
•
The level of the water softener according to the water hardness.
•
The activation or deactivation of the rinse aid empty notification.
These settings will be saved until you change them again.
and
until the appliance is in programme selection mode.
and
.
,
and
start to flash.
is flashing and the
7
Hide quick links:
Advertisement
Table of Contents
