Installation - JBL BassPro Owner's Manual

2

INSTALLATION

WARNING: Playing loud music in INSTALLATION
an automobile can hinder your ability WARNINGS AND TIPS:
to hear traffic and permanently dam- • Always wear protective eyewear
age your hearing. We recommend
listening at low or moderate levels
• Disconnect the vehicle's negative (–)
while driving your car. JBL accepts
no liability for hearing loss, bodily
injury or property damage resulting
• Check clearances on both sides of
from the use or misuse of this product.
• When making electrical connections,
• If BassPro's fuse must be replaced,
Figure 1.
CHOOSING A MOUNTING
LOCATION FOR
BASSPRO:
when using tools. Choose a mounting location that
doesn't interfere with cargo, the fold-
down rear seat or the trunk lid. The
battery terminal before starting the
best location is usually a corner of
installation.
the trunk or cargo area, as shown
in Figures 1 and 2.
a planned mounting surface. Be
sure that screws or wires will not
Securely mount BassPro to the
puncture brake lines, fuel lines or
mounting surface using the four
wiring harnesses, and that wire
enclosed self-tapping screws.
routing will not interfere with the safe
Choose a mounting location in the
operation of the vehicle.
front of the vehicle for the remote
level control.
make sure they are secure and
properly insulated.
be sure to use the same type of fuse
and current rating as that of the
original.
Figure 3. Bottom view of BassPro.
Figure 2.