Page 1
BASS20 Powered Subwoofer SERVICE MANUAL SERVICE MANUAL JBL Consumer Products Inc. 80 Crossways Park West Woodbury, N.Y. 11797 1-800-336-4JBL in the USA A Harman International Company Part No.: 1112-JBLBASS20...
Width . Depth . Weight. 42lbs (19.1kg) FEATURES The Bass20 powered subwoofer is part of the SCS120 or Line level or Speaker level inputs, outputs for full range MUSIC 20 System. satellite speakers. 150 watt output. User friendly auto on circuit. Signal sensing automatically turns the subwoofer on so you don’t have...
BASS 20 POWERED SUB WOOFER TEST SETUP JBL continually strives to improve its products. New materials, production methods and design refinements are introduced into existing models without notice as a routine expression of our design philosophy. For this reason, Bass Series loudspeakers may differ in some respect from their published specifications and descriptions, but will always equal or exceed the original specifications unless otherwise stated.
SERVICE NOTE (120v Version only) Even though the Bass20 seems to have an on/off power switch, in fact the switch does not switch the main power off to the amp assembly, even in the OFF position. All AC and DC voltages within the amplifier are still active, so for safety concerns the AC power cord should be unplugged before any servicing begins.
Create solderable surface on PCB, (just above R49) by scaping the green mask from the board with Exacto knife or similar tool. Attach R41, 470W 1W resistor (JBL #RS2180) to new surface and C1 (-) pad. Resistor should "stand off" from PCB; secure with RTV or epoxy if desired.