Changing The Settings; Change Procedure; Returning To Default Settings; About The Auto Standby Function - Pioneer DJM-900NXS2 Operating Instructions Manual

Changing the settings

! For Setting preferences see page 20 .

Change Procedure

1 Press the [QUANTIZE (UTILITY, WAKE UP)] button for
over 1 second.
The [UTILITY] screen is displayed.
2 Press the [BEAT c, d] button.
Select the setting item.
3 Press the [TAP] button.
Detailed settings for the setting items are displayed here.
4 Press the [BEAT c, d] button.
Select a detail setting.
5 Press the [TAP] button.
The setting item's setting value change screen is displayed.
6 Press the [BEAT c, d] button.
Change the setting value.
7 Press the [TAP] button.
Enter the setting value.
The previous screen reappears.
! To return to the previous screen without changing the settings, press
the [AUTO/TAP] button.
8 Press the [QUANTIZE (UTILITY, WAKE UP)] button.
The [UTILITY] screen closes.
Setting items displayed with [
Setting the setting item [LOCK] to [OFF] allows you to change the item
[ ].
! Close the [UTILITY] screen to return [LOCK] to [ON].

Returning to default settings

1 While pressing the [QUANTIZE (UTILITY, WAKE UP)]
buttons, press the [POWER] button.
[FACTORY RESET] mode is displayed.
2 Press the [BEAT c, d] button.
Select [YES].
3 Press the [TAP] button.
Enter the setting value.
4 Press [POWER] button.
Turn off the power of this unit.

About the auto standby function

When [AUTO STANDBY] is set to [ON], the unit automatically enters
the standby mode if 10 hours elapses with all of the following conditions
met.
— That none of this unit's buttons or controls are operated.
— That no audio signal is input to each channel of this unit.
— That no PRO DJ LINK connections are made.
! When the [QUANTIZE (UTILITY, WAKE UP)] button is pressed, the
standby mode is canceled.
! This unit is shipped with the auto standby function turned on. If you
do not want to use the auto standby function, set [AUTO STANDBY]
to [OFF].
18
En

About the talk over function

The talk over function has the two modes described below.
— [ADVANCED] (advanced talk over): The mid-range only of the sound
of channels other than the [MIC] channel is attenuated according to
the [LEVEL] setting value and output.
— [NORMAL] (normal talk over): The sound of channels other than the
[MIC] channel is attenuated according to the [LEVEL] setting value
and output.

About the setting utility software

The setting utility can be used to make the checks and settings
described below.
— Checking the status of this unit's input selector switches
]
— Setting the audio data output from this unit to the computer
— Adjusting the buffer size (when using Windows ASIO)
— Checking the version of the firmware and driver software
Displaying the setting utility
For Windows
Click [Start] menu > [All Programs] > [Pioneer] > [DJM-900NXS2] >
[DJM-900NXS2 Settings Utility].
For Mac OS X
Click [Macintosh HD] icon > [Application] > [Pioneer] > [DJM-
900NXS2] > [DJM-900NXS2 Settings Utility].
Checking the status of this unit's input
selector switches
Display the setting utility before starting.
dB
dB
Frequency
Frequency