12. Document revision history........... 17 Disclaimer The information in this document is subject to change without notice and should not be construed as a commitment by ABB. ABB assumes no responsibility for any errors that may appear in this document.
1. Description 2. Complete communication system Wireless Protocol Gateway ARP600 provides wireless Wireless Protocol Gateway ARP600 is typically part of a monitoring and control of field devices via cellular network from complete communication system which consists of Arctic 600 a central site or a control center. The devices offer industrial...
ARP600 Product version: 3.3 GUID-E5D54FB6-E09E-4EF7-AF2E-15813DB72832 V1 EN Figure 1. Communication system overview and IEC-101 to IEC-104 protocol conversion example with Wireless Protocol Gateway ARP600 and remote terminal unit (RTU) 3. Application Key features Wireless Protocol Gateway ARP600 can be used in feeder •...
Communication solution in distribution automation overview 4. Physical interfaces Variant with single SIM ARP600 has two hardware variants called dual SIM and single The single SIM variant has two serial ports (RS-232, RS-485) SIM. Mechanically, the variants are different but include the and one LAN/WAN port (RJ-45) for device connectivity.
Page 6
Wireless Protocol Gateway 1MRS758463 B ARP600 Product version: 3.3 9 10 GUID-BA181869-D802-4E3B-A79E-688E1E37D6B2 V1 EN Figure 3. LEDs in single SIM variant Batt. Status Power/Error Function Eth 1 Eth 2 Led 1 Led 2 Led 3 10 Led 4/GPRS Table 1. Description of available LEDs on the side panel (single SIM variants)
Page 7
Wireless Protocol Gateway 1MRS758463 B ARP600 Product version: 3.3 9 10 11 GUID-2F75FFBF-5082-49D1-951E-CDA1A690E70C V1 EN Figure 4. LEDs in dual SIM variant 10 RS1 11 RS2...
Page 8
Wireless Protocol Gateway 1MRS758463 B ARP600 Product version: 3.3 Table 2. Description of available LEDs on the side panel (dual SIM variants) Label State Description Unit is restarting. LED should be turned off after restart (usually about 30 seconds) Flashing Error with power supply.
Page 9
Wireless Protocol Gateway 1MRS758463 B ARP600 Product version: 3.3 Front panel GUID-FD7297D1-5F9C-49CF-82F0-AF5D989D035D V1 EN Figure 5. Front panel for single SIM variants 1 Power supply 12...48 VDC 2 Console/serial port 3 Application serial ports 4 LAN/WAN port 5 Power switch...
The SIM card slots and antenna connector can be found on the antenna panel. 5. Communication the Wireless Protocol Gateway ARP600 protocol conversion Wireless Protocol Gateway ARP600 provides a complete feature, conventional IEC-101 and Modbus serial devices can solution for integrating remote serial (RS-232/RS-485) or...
Page 11
More information is available in the Technical data section of ARP600 provides a secure and reliable communication solution this product guide or technical manual available at with support for secure VPN communication, static IP routing, www.abb.com/substationautomation.
Wireless Protocol Gateway 1MRS758463 B ARP600 Product version: 3.3 7. Mounting highly recommended to use the optional external antenna with The devices have been equipped with mounting arrangements appropriate cable. This allows for better positioning of the that are specially designed for DIN rail mounting. A set of DIN devices, antennas and thus optimal performance.
Wireless Protocol Gateway 1MRS758463 B ARP600 Product version: 3.3 12. Document revision history Document revision/date Product version History A/2015-12-18 First release B/2017-06-07 Content updated...
Page 20
Contact us ABB Oy Medium Voltage Products, Distribution Automation P.O. Box 699 FI-65101 VAASA, Finland Phone +358 10 22 11 +358 10 22 41094 www.abb.com/mediumvoltage www.abb.com/substationautomation...