Samsung RT21M User Manual page 43

STEP 5 Reattach the doors on the opposite side
Untitled-1 43
1. Use a flat-heat screwdriver to remove
the middle-hinge screw cap, and then
reinsert it on the opposite side.
2. Use the flat-heat screwdriver to remove
the flange-screw cap to reveal the
flange screw. Use a Phillips screwdriver
to remove the flange screw, and then
tighten it on the opposite side. Finally,
close the flange-screw cap on the
opposite side.
3. Remove the grommet ring from the
middle-hinge shaft, and then reinsert
the ring on the other side of the shaft.
See the figure for visual reference.
English 43
2017-03-15 3:50:39