Panasonic KX-TDA0490 Programming Manual page 27

Parameter & Description
* Digit End Code
Specifies the delimiter code to be used to signal the end of a
dial number.
Generally, there is no need to change the default value.
Others
Parameter & Description
Network CODEC of IP-PBX
The value of this parameter is set automatically as
appropriate to the setting of the PBX.
There is no need to change the value.
Default Value Range
# 0 to 9, #, *
Default Value Range
Not applicable G.711 Mu-Law,
G.711 A-Law
Programming Guide
2.2 Programming
27