Table of Contents
Advertisement
2.2 Programming
Voice CODEC Settings
Parameter & Description
*
Voice CODEC Priority 1st–4th
Specifies the type of CODEC for voice communications.
Choose the appropriate CODEC for the network environment
(e.g., bandwidth, CODEC conditions of the remote terminal).
When using multiple CODECs, set them in an appropriate
priority order.
Prior to establishing a call, a negotiation takes place over the
network and the CODEC to be used will be decided
depending on the setting of this parameter.
For details about relations between bandwidth and CODEC,
refer to "Detailed Explanations" in "2.2.3 Voice
Communication Parameters".
Note
When the Fast Connect feature (see under "Others"
below) is disabled, the communicating cards must have
the same first priority CODEC set.
Gatekeeper Settings
Parameter & Description
#
Gatekeeper
Specifies the use of a gatekeeper.
For details, refer to "Detailed Explanations".
*
Primary Gatekeeper IP Address
Specifies the IP address of the primary gatekeeper.
*
Primary Gatekeeper Port No.
Specifies the port number of the primary gatekeeper.
*
Secondary Gatekeeper IP Address
Specifies the IP address of the secondary gatekeeper.
Set this parameter when setting up a secondary gatekeeper
as a redundant backup system.
Secondary Gatekeeper Port No.
*
Specifies the port number of the secondary gatekeeper.
Set this parameter when setting up a secondary gatekeeper
as a redundant backup system.
16
Programming Guide
Default
Value Range
1st: G.729A
G.723.1,
2nd: No default
G.729A,
3rd: No default
G.711Mu,
4th: No default
G.711A
Default
Value Range
Don't use
Use,
Don't use
192.168.1.3
The following addresses
are invalid:
•
Class D addresses
•
Class E addresses
•
Loopback
addresses
1719
1 to 65535
192.168.1.4
The following addresses
are invalid:
•
Class D addresses
•
Class E addresses
•
Loopback
addresses
1719
1 to 65535
Hide quick links:
Advertisement
Table of Contents
