Table of Contents
Advertisement
Floppy disk can not be used.
Checkpoint
If the floppy disk loaded into
the floppy disk drive correctly?
Is the floppy disk formatted?
Is Diskette A set to Not
Installed in the BIOS setup?
Is Diskette access set to
Supervisor only in the BIOS
setup?
Is the floppy disk write
inhibited?
Does it work with a different
floppy disk?
No sound or minimal sound from speaker.
Checkpoint
Is the volume control correctly
adjusted?
Can not record from Mic or Line In jack.
Checkpoint
Is the mic correctly adjusted?
LCD panel does not close.
Checkpoint
Is something caught in the
LCD panel?
100
Cause and Solution
Insert the floppy disk with its label facing up, into the drive
shutter and keep inserting firmly until you hear a clicking sound.
New floppy disks can not be used until they are formatted
(initialized). Format the floppy disk.
Check the Diskette A item in the BIOS setup Main menu.
Check the Diskette access item in the BIOS setup Security
menu.
Set the write protect tab on the floppy disk to the write enable
position.
If it works with a different floppy disk then the problem floppy disk
may be damaged.
Turn the volume control for the correct volume. If this does not
change the volume, double click the task bar sound indicator and
adjust the volume. Check also whether the sound driver is
installed correctly.
Turn the volume control to obtain the correct volume. If the line
jack is connected to the sound source, then check that connec-
tion. If this still does not solve the problem, then double click the
task bar sound indicator and adjust the volume.
Forcing the LCD panel closed can damage it. Check for
something caught in the LCD panel. Also, a metal object such as
a paper clip can cause a breakdown if it gets caught in between
the keys.
Cause and Solution
Cause and Solution
Cause and Solution
Advertisement
Table of Contents
