Status Leds - Honeywell Lyric C1 User Manual

Status LEDs

During Wi-Fi connection and camera operation, the LED shows the status of
the camera.
LED
During installation
Blinking blue
Solid blue
Solid red (for
2 seconds)
Solid purple
Blinking green
Solid green
During operation
Blinking green
Solid green
Blinking red
Camera state
Powered up. Ready to begin setup.
If the LED blinks blue during setup, it has lost
bluetooth connection. Unplug it and plug it back in
again. See "Connect the power cable" on page 4
for instructions.
Connected to App. Ready to complete setup.
Setup timed out, or connection failed. The LED will
then turn solid purple. Unplug camera, plug it back
in, and restart the process.
QR Code scan complete.
See "Connect to Wi-Fi" on page 5.
Connecting to Wi-Fi network.
Connected to Wi-Fi network.
Connecting to Wi-Fi network.
Connected to Wi-Fi and operating.
Not connected to Wi-Fi.
6