Technical Data - Stanley SPS-750 Original Instructions Manual

TECHNICAL DATA

GENERAL
Engine type
Engine displacement
Max. engine power , in kW
Max. engine speed
Engine idle speed
Clutch engagement speed
Fuel tank volume
Fuel type
Engine oil type
Mixture ratio petrol : oil
Spark plug gap
Net weight (without cutting attachment and with
empty tanks) approx.
PRUNER
Chain oil tank
Saw chain speed
Max. cutting length
Guide bar length
Chain pitch
Chain gauge (thickness of drive links)
Drive sprocket (teeth and pitch)
Noise values
Sound pressure level L
pA,av
Uncertainty
Sound power level L
WA,av
Uncertainty
Guaranteed sound power level L
Vibration a :
hv
Uncertainty
The declared vibration value has been measured in
accordance with a standard test method
and may be used for comparing one tool with
another.
The declared vibration value may also be used in a
preliminary assessment of exposure.
WARNING! The vibration emission value
during actual use of the tool can differ from
the declared value depending on the ways
in which the tool is used. Identify safety measures
SL34, air cooled 2-stroke
26cc
0.75 kW
12500/min
3000 /min
4430 /min
400 ml
unleaded
2-cycle motor oil
40 : 1
0.6 – 0.7 mm
6.0 kg
150 ml
28 m/s
230 mm
305 mm
9.525 mm (3/8")
1.27 mm (0.050")
7 teeth x 9.525 mm(3/8")
80.4 dB(A)
3 dB(A)
100.4 dB(A)
3 dB(A)
114 dB(A)
WA
10.220m/s
1.5 m/s²
to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is
switched off and when it is running idle in addition
to the trigger time).
The sound intensity level for the operator may
exceed 85dB(A) and ear protection measures
are necessary.
REPAIR
This product does not contain any parts that can
be repaired by the consumer. Contact a qualified
specialist to have it checked and repaired.
TRANSPORTATION
1. Switch the product off and disconnect the spark
plug connector before transporting it anywhere.
2. Attach transportation guards for cutting means
of hedge trimmer, brush cutter and pruner.
3. Always carry the product by its handles.
4. Protect the product from any heavy impact or
strong vibrations which may occur during
transportation in vehicles.
5. Secure the product to prevent it from slipping or
falling over.
ENVIRONMENTAL PROTECTION
1. Waste products should not be disposed of with
household waste. Please recycle where facilities
exist. Check with your Local Authority or local store
2
for recycling advice.
2. Petrol, oil, old oil, a mixture of oil and petrol and
objects soiled with oil e.g. cleaning cloths do not
belong in the household rubbish. Dispose of oily
items in accordance with local guidelines and hand
them in at recycling centres.
3. The product comes in a package that protects
it against damages during shipping. Keep the
package until you are sure that all parts have been
delivered and the product is function properly.
Recycle the package afterwards.
25
G
B