Technical Data; Service Indicator Status - Hilti TE 60-AVR Manual

This system provides additional drilling safety and convenience as it causes rapid shutdown upon sudden
rotation of the power tool about the drill bit axis. This may occur, for example, when the drill bit sticks due to
hitting a rebar or when the drill bit is tilted unintentionally.
Always choose a working position in which the body of the power tool, when running in a forward direction
(clockwise), is free to rotate in a counterclockwise direction (as seen by the operator). When running in
reverse, the tool reacts to sudden clockwise rotation. If rotational movement is not possible, the ATC system
cannot react.
3.7 Active Vibration Reduction
The tool is equipped with an Active Vibration Reduction (AVR) system which reduces vibration noticeably.
3.8 Quick-release chuck (accessory)
The quick-release chuck makes it possible to change accessory tools quickly, without need for a chuck key
(keyless system). It is suitable for accessory tools with a cylindrical or hexagonal shank, such as drill bits for
wood and metal, or mixing paddles, which are used in the rotary-only mode (without hammering action)
3.9 Service indicator
The product is equipped with a service indicator LED.

3.9.1 Service indicator status

Status
The service indicator lights.
The service indicator blinks.
3.10 Items supplied
Combihammer, side handle, operating instructions.
3.11 Accessories and spare parts
Further information about other system products ap-
proved for use with your product can be found by scan-
ning this QR code or online at: www.hilti.group.

4 Technical data

4.1 Combihammer
When powered by a generator or transformer, the generator or transformer's power output must be at least
twice the rated input power shown on the rating plate of the power tool. The operating voltage of the
transformer or generator must always be within +5% and -15% of the rated voltage of the power tool.
The information given applies to a rated voltage of 230 V. The data may vary in the event of deviations from
the rated voltage and for country-specific versions. Please refer to the power tool's rating plate for details of
its voltage, frequency, current and input power ratings.
Rated power input
Rated current input
Weight in accordance with EPTA proce-
dure 01/2003
Single impact energy in accordance with
EPTA procedure 05
Ø Hammer drill bits
Ø Breach bits
Ø Percussion core bits
Printed: 28.06.2017 | Doc-Nr: PUB / 5277961 / 000 / 01
Meaning
• End of service interval – servicing is due.
• Have the combihammer repaired by Hilti
Service.
TE 60­AVR
1,350 W
7.2 A
6.8 kg
7.8 J
12 mm ... 40 mm
40 mm ... 80 mm
45 mm ... 100 mm
TE 60-ATC/AVR
1,350 W
7.2 A
7.8 kg
7.8 J
12 mm ... 40 mm
40 mm ... 80 mm
45 mm ... 100 mm
English
.
5