Using IrDA (infrared)
1
Select IrDA (infrared) using the interface switch.
When the power is turned on, the status indicator light
lights up in green.
2
Position the printer and the mobile device so that
their IrDA infrared ports are facing each other and
are 20 cm/7.9" or less apart.
When IrDA (infrared) is selected, you cannot use
the Bluetooth function.
During transmission, do not move the printer or the mobile
device.
Make sure there are no obstacles between the printer and the
mobile device.
If the printer is connected with a USB cable or if the mobile
device is connected using a serial interface, the infrared
transmission cannot be used.
IrDA infrared transmission between computers is not
supported.
For more information, see the instruction manual for the
mobile device.
Operating Procedures
13