Cadillac CTS-V 2018 Owner's Manual page 63

62 SEATS AND RESTRAINTS
5. Repeat Steps 1 4 for a second
driver using 1 or 2.
To save the position for
exit features, repeat Steps 1 4 using
. This stores the position for
getting out of the vehicle.
Save preferred memory feature
positions to both 1 and 2 if you are
the only driver.
Manually Recalling Memory
Positions
Press and hold 1, 2, or
the previously stored memory
positions.
To stop manual recall movement,
release 1, 2, or . Recall can also be
stopped by pressing a power seat, SET,
power mirror, or power steering wheel
control, if memory equipped. The
driver or passenger side mirror must
be selected.
Auto Memory Recall
The vehicle identifies the number of
the current driver s RKE transmitter
(1 8). See Remote Keyless Entry (RKE)
System Operation 0 30. If the RKE
transmitter is 1 or 2, and Auto
Memory Recall is programmed on in
vehicle personalization, the positions
and easy
saved to the same memory button
number 1 or 2 are automatically
recalled when the ignition is turned
on, or turned from off to ACC/
ACCESSORY. RKE transmitters 3 8
will not provide automatic memory
recalls.
To turn Auto Memory Recall on or off,
see "Vehicle Personalization Settings"
previously in this section and Vehicle
to recall
Personalization 0 142.
The transmission must be in P (Park)
to initiate Auto Memory Recall. Auto
Memory Recall will complete if the
vehicle is shifted out of P (Park) prior
to reaching the stored memory
position.
To stop Auto Memory Recall
movement, turn the ignition off or
press any of the following memory
controls:
Power seat
Memory SET, 1, 2, or
Power mirror, with the driver or
passenger side mirror selected
Power steering wheel
If the stored memory seat position
does not automatically recall or recalls
to the wrong positions, the driver s
RKE transmitter number (1 or 2) may
not match the memory button
number that positions were saved to.
Try storing the position to the other
memory button or try the other RKE
transmitter.
Easy Exit Recall
Easy Exit Recall is not linked to an
RKE transmitter. The position stored
to is used for all drivers. To turn
Easy Exit Recall on or off, see "Vehicle
Personalization Settings" previously in
this section and Vehicle Personalization
0 142.
If turned on, the position saved to
is automatically recalled when one of
the following occurs:
The vehicle is turned off and the
driver door is opened within a
short time.
The vehicle is turned off with the
driver door open.