Forward Automatic; Braking (Fab) - Cadillac CTS-V 2018 Owner's Manual

Hide thumbs Also See for CTS-V 2018:
Table of Contents

Advertisement

232
DRIVING AND OPERATING
Unnecessary Alerts
FCA may provide unnecessary alerts
for turning vehicles, vehicles in other
lanes, objects that are not vehicles,
or shadows. These alerts are normal
operation and the vehicle does not
need service.
Cleaning the System
If the FCA system does not seem to
operate properly, this may correct the
issue:
Clean the outside of the
windshield in front of the rearview
mirror.
Clean the entire front of the
vehicle.
Clean the headlamps.

Forward Automatic

Braking (FAB)

If the vehicle has Adaptive Cruise
Control (ACC), it also has FAB, which
includes Intelligent Brake Assist (IBA).
When the system detects a vehicle
ahead in your path that is traveling in
the same direction that you may be
about to crash into, it can provide a
boost to braking or automatically
brake the vehicle. This can help avoid
or lessen the severity of crashes when
driving in a forward gear. Depending
on the situation, the vehicle may
automatically brake moderately or
hard. This forward automatic braking
can only occur if a vehicle is detected.
This is shown by the FCA vehicle
ahead indicator being lit. See Forward
Collision Alert (FCA) System 0 229.
The system works when driving in a
forward gear above 4 km/h (2 mph).
It can detect vehicles up to
approximately 60 m (197 ft).
Warning
FAB is an emergency crash
preparation feature and is not
designed to avoid crashes. Do not
rely on FAB to brake the vehicle.
FAB will not brake outside of its
operating speed range and only
responds to detected vehicles.
Warning (Continued)
FAB may not:
Detect a vehicle ahead on
winding or hilly roads.
Detect all vehicles, especially
vehicles with a trailer,
tractors, muddy vehicles, etc.
Detect a vehicle when
weather limits visibility, such
as in fog, rain, or snow.
Detect a vehicle ahead if it is
partially blocked by
pedestrians or other objects.
Complete attention is always
required while driving, and you
should be ready to take action and
apply the brakes and/or steer the
vehicle to avoid crashes.
FAB may slow the vehicle to a
complete stop to try to avoid a
potential crash. If this happens, FAB
may engage the Electric Parking Brake
(EPB) to hold the vehicle at a stop. To

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cts 2012Cts 2018

Table of Contents