The equipment can be removed using the following procedure.
z
Cabinet (front) sub ASSY
Set
Cabinet (rear)
Note : Follow the disassembly procedure in the numerical order given.
3-1. CABINET (FRONT) SUB ASSY
8 Knob (Vol )
3-2. CONTROL BOARD, CONNECTOR BOARD
SECTION 3
DISASSEMBLY
Control board, Connecter board
Volume board, LCD board, Main board
Cabinet (upper)
REC switch board, Mechanism deck, Optical pick-up section, CD motor board
Belt, M601 (capstan/reel motor)
Power board, Secondary board, Half battery board, battery board
Cabinet (front) sub assy
9
6 Open the Lid (CD)
3 Screws
+BVTP 3 × 12
Cabinet (Front) sub assy
– 5 –
7 Screw
+BVTP 3 × 12
cabinet (rear)
5
4 Screw
1
Lid, battery case
2 Screws
+BVTP 3 × 10
CONTROL board
2
Connector board
1 Screws
+BVTP 2.6 × 8
+BVTP 3 × 10