Fill until the level has reached the Maximum mark on the water level indicator
•
which is located on the lower front of the unit. DO NOT OVERFILL.
Ice blocks can also be added which will help cool the water / air.
•
Place ice in the rear Ice Channel as shown. Do not add water to this area.
Ice can also be added to the Water Filling Tray.
Do Not Fill with any liquid other than clean cold water. Do Not add any additives
•
to the water.
Refit the Cover before turning on.
•
5 Controls
5.1 Evaporative Cooler
Page 7 of 12
Place Ice
Cubes Here
Do Not Add
Water Here