■
VERSION UPGRADE
Download the version upgrade program from the Yamaha offi cial website.
●
List of the updating Flash ROM
CVP-405/PE/PM
●
File name
· CVP-405inst.prg
●
How to Install
Never turn the instrument off while installing.
It may break the boot Flash ROM device.
Particularly, turning off the power immediately after staring installation may cause damage to the boot.
If operation still fails even after re-installation, the DM circuit board must be replaced.
Never pull off the USB fl ash memory from the instrument while installing.
1
Insert the USB fl ash memory to the instrument.
2
Boot the instrument with install mode.
Turn on the instrument with pressing [START/STOP] button.
[USB TO DEVICE] terminal
Main Program
· CVP-405mainprg1.prg
· CVP-405mainprg2.prg
[DIRECT ACCESS] button
[START/STOP] button
Program Installer ver. *.**
To start installation,
please press the [START/STOP] button.
To delete the update program,
please press the [BREAK] button.
Caution!
Do not turn off the power until
all installations are finished.
Copyright(C) 2007 Yamaha Corporation
CVP-405/CVP-405PE/CVP-405PM
DM
· CVP-405mainprg3.prg
· CVP-405mainprg4.prg
[POWER]
switch
IC15, IC16
91