Connecting The Computer - Dell Alienware AW2518H User Manual

Connecting the Computer

WARNING: Before you begin any of the procedures in this section,
follow the Safety
NOTE: Do not connect all cables to the computer at the same time.
NOTE: See also
To connect your monitor to the computer:
1. Connect the other end of the connected DP or HDMI cable to your
computer.
2. Connect the upstream USB 3.0 port (cable supplied) to an appropriate
USB 3.0 port on your computer. (See
3. Connect the USB 3.0 peripherals to the downstream USB 3.0 ports on the
monitor.
4. Plug the power cables for your computer and monitor into a nearby outlet.
5. Turn On the monitor and the computer.
If your monitor displays an image, installation is complete. If it does not
display an image, see
NOTE: The graphics are used for the purpose of illustration only.
Appearance of the computer may vary.
24 | Setting Up the Monitor
Instructions.
Attaching the Stand.
Universal Serial Bus (USB) Specific
Rear and Bottom View for details.)
Problems.