7.1.5 Multi-Feeding
• Description
Multiple sheets of paper are fed at once.
Check and Cause
1. Solenoid malfunction(the solenoid does not work
properly): Perform DCU mode : solenoid check 06.
2. Friction-Pad is contaminated with foreign matter.(oil..)
3. The face of paper is blended.
7.1.6 Paper rolled in the fuser
• Description
If contaminated at intervals of 57mm on the back of a paper.
Check and Cause
1. Contamination of the pressure roller.
(Background, Hot off set)
Samsung Electronics
Solution
1. Replace the solenoid if necessary.
2. Clean the friction-pad with soft cloth dampened with
IPA(Isopropyl Alcohol).
3. Use the smooth paper.
Solution
1. Disassemble the fuser, clean the area between the
Heat-roller and Thermistor and remove the foreign
matter off of the pressure roller.
2. If background appears badly in the printing, fix it by
referring to the solutions for background.
(See 4.5.8 Background)
T RO U B L E S H O OTING
Service Manual
7-3