Sharp LC-46SE94U Service Manual page 19

LC-46SE94U/LC-46SE941U
13.Remove the 2 lock screws, 4 lock shafts and detach the Main Terminal Angle.
14.Remove the 3 lock screws and detach the AC INLET Unit.
15.Remove the 6 lock screws and detach the POWER Unit.
16.Remove the 5 lock screws and detach the TERMINAL Unit.
17.Remove the 1 lock rivet and detach the Main Shield Plate.
18.Remove the 3 lock screws, 2 lock screws and detach the Heat Sink and MAIN Unit.
18
Heat Sink
15
17
Main Shield Plate
POWER Unit
18
AC INLET Unit
MAIN Unit
Main Terminal Angle
14
TERMINAL Unit
16
4 – 5