Remove the server from the cradle.
2.
Remove the server from the wall mount
Open the wall mount latch.
1.
Remove the server from the wall mount.
2.
Remove the server from the storage expansion unit
Before you perform this procedure, make sure that you have a No. 2 Phillips screwdriver available.
Hold the top side of the server and the bottom side of the storage expansion unit, and then carefully
1.
turn the assembly over to access the bottom side of the storage expansion unit.
Remove the server from the storage expansion unit:
2.
Pull the latch on the rear of the storage expansion unit.
a.
Loosen the captive screws.
b.
Operations 17