Selecting A Track And Searching; Programming Tracks - Philips eXpanium EXP-2461 User Manual

SELECTING A TRACK AND SEARCHING

Selecting and searching on all discs
Selecting a track
• Briefly press ∞ or § once or several times to skip
to the beginning of the current, previous or subse-
quent track.
• In the pause/stop position, press 2; to start play-
back.
➜Playback starts with the selected track.
Searching for a passage during playback
Press and hold ∞ or § to find a particular passage
1
in a backward or forward direction.
➜Searching starts while playback continues at low volume.
After 2 seconds the search speeds up.
2
Release the button when you reach the desired passage.
➜Playback continues from this position.
Selecting on MP3 CDs
To find a MP3 track, you can first press 3 or 4 to select your desired album.
Selecting an album
•Hold down or press 3 or 4 repeatedly until you find
the desired album number.
•In the pause/stop position, press 2; to start play-
back.
➜The first track of the selected album plays.
Helpful Hints:
– When the program mode is active, use of the 3 or 4 keys are void.

PROGRAMMING TRACKS

You can select up to 64 tracks and store them in the memory in a desired
sequence. You can store any track more than once.
Select a track with ∞ or § and also 3 or 4 for a
1
MP3 CD.
2
Press PROG to store the track.
➜ program lights up. P with the number
of stored tracks is displayed.
3
Select and store all desired tracks in this way.
Press 2; to start playback of your programmed
4
tracks.
➜
program is shown and playback starts.
5
To add additional tracks to your program,
press 9 to stop playing the program and
continue with step 1 and 2.
➜ After 64 tracks are stored,
FL PrO9 is shown.
Reviewing the program
You can review the programme by pressing PROG
for more than 3 seconds.
➜ All stored tracks are displayed in sequence.
Clearing the program
If necessary press 9 to stop playback.
1
Press 9 to clear the program.
2
➜ cL PrO9 is displayed.
SELECTING DIFFERENT PLAYING POSSIBILITIES − MODE
It is possible to play tracks in random order, to repeat a single track or the entire
CD, and to play the first few seconds of each track.
1 Press MODE once or more during playback to acti-
vate one of the following.
– : The current track plays repeatedly.
– : All tracks of the disc/program play
repeatedly.
– : (for MP3 CDs only): All tracks of the
current album play repeatedly.
– : All tracks of the disc play in random
order repeatly.
– : All tracks of the disc play in random
order once.
– : (for MP3 CDs only): All tracks of the cur-
rent album play in random order once.
– : (for MP3 CDs only): All tracks of the
current album play in random order
repeatly.
– scan: Each track in the disc plays 10 seconds
in sequence.
➜ For scan and random play, playback of selected
mode starts with the next track.
2 To return to normal playback, press MODE repeatedly until the mode cursors
disappear.
PROGRAMMING TRACKS
Helpful Hints:
– During programming, if no action is executed within 10 seconds, programming
will stop automatically.
– The program will also be cleared if the power supply is interrupted, or if the
player lid is opened, or if the set switches off automatically.