Using An Accessory Rf Modulator; Connecting The Power Cord - Philips eXpanium AZ 4000 User Manual

RF coaxial cable to TV
2
Back of RF Modulator
(example only)
INT IN TO TV AUDIO IN
VIDEO
IN R
Antenna or
Cable TV signal
AUDIO
L R COAXIAL VIDEO Y Pb
IMPORTANT!
– If your TV only has a single
Antenna In jack (or labeled as 75
ohm or RF In,) you will need an RF
modulator in order to view the DVD
playback on the TV. See your
electronics retailer or contact for
details on RF modulator availability
and operations.

Using an accessory RF modulator

1
Use the composite video cable (yellow) to
connect the DVD Player's CVBS jack to
the video input jack on the RF modulator.
2
Use the RF coaxial cable (not supplied) to
connect the RF modulator to your TV's
RF jack.
01-28 DVP4000_692
L
CH3 CH4
1
MAINS
VIDEO
Pr
7
Connections

Connecting the power cord

COMPONENT
VIDEO IN
S-VIDEO S-VIDEO
IN IN
AUDIO V (Pr/Cr)
AUDIO SCART/RGB IN
IN
OUT
U (Pb/Cb)
VIDEO IN
VIDEO IN
Y
MAINS
VIDEO
VIDEO Y Pb Pr
After everything is connected
properly, plug in the AC power cord
to the power outlet.
Never make or change any connections
with the power switched on.
18/01/2005, 2:52 AM
~ AC MAINS
7
3139 246 14652