Connections; Connecting Tv; Using Composite Video Jacks (Cvbs); Using Component Video Jacks (Y Pb Pr) - Philips eXpanium AZ 4000 User Manual

Connections

Connecting TV

COMPONENT
VIDEO IN
S-VIDEO
IN V (Pr/Cr) AUDIO
OUT
U (Pb/Cb)
VIDEO IN
Y
2
AUDIO
L R COAXIAL VIDEO
IMPORTANT!
– You only need to make one video
connection from the following
options, depending on the
capabilities of your TV system.
– Connect the DVD system directly
to the TV.
Using Composite Video jacks
(CVBS)
1
Use the composite video cable (yellow) to
connect the DVD Player's CVBS (VIDEO)
jack to the video input jack (or labeled as
A/V In, Video In, Composite or Baseband)
on the TV (cable supplied).
2
To hear the sound of this DVD Player
through your TV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on the TV
(cable supplied).
6
01-28 DVP4000_692
COMPONENT
VIDEO IN
S-VIDEO
IN
AUDIO
V (Pr/Cr)
IN
U (Pb/Cb)
VIDEO IN
Y
1
M
VIDEO
Y Pb Pr
1
2
6
S-VIDEO
IN
AUDIO
V (Pr/Cr)
IN
U (Pb/Cb)
VIDEO IN
COMPONENT
VIDEO IN
S-VIDEO
IN V (Pr/Cr)
AUDIO
OUT
U (Pb/Cb)
VIDEO IN
Y
1
2
AUDIO
L R COAXIAL VIDEO Y
IMPORTANT!
– Component Video connection
provides higher picture quality. This
option must be available on your TV.
– The progressive scan video
quality is only possible through
Component Video (Y Pb Pr) output.
Using Component Video jacks
(Y Pb Pr)
Use the component video cables (green/
blue/red) to connect the DVD system's Y
Pb Pr jacks to the corresponding
Component video input jacks (or labeled
as Y Pb Pr) on the TV (cable not supplied).
To hear the sound of this DVD Player
through your TV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on the TV
(cable supplied).
18/01/2005, 2:52 AM
COMPONENT
VIDEO IN
Y
VIDEO
Pb Pr
3139 246 14652