Honda CR250R 2004 Owner's Manual page 21

4. SERVICE AND MAINTENANCE
8. Disconnect the fuel line from the fuel valve.
The fuel line leading to the carburetor must be dis-
connected, not the fuel line leading to the fuel tank.
9. Remove the fuel tank.
•
Gasoline is extremely flammable and is explosive
under certain conditions. Perform this operation in
a well-ventilated area with the engine stopped. Do
not smoke or allow flames or sparks in the area
where gasoline is drained or stored and where the
fuel tank is refueled.
(1) FUEL LINE (2) FUEL VALVE
18
Fuel Tank Installation
1. Install the fuel tank on the frame.
2. Connect the fuel line.
(1) FUEL VALVE (2) FUEL LINE
3. Install the fuel tank bolt.
4. Hook the fuel tank band.
5. Put the breather tube in the steering stem nut.
(1) FUEL TANK BOLT
(2) FUEL TANK BAND
(3) BREATHER TUBE
6. Install the shrouds, collars and shroud B bolts.
7. Install the collars and shroud A bolts.
(1) SHROUD
(2) SHROUD B BOLTS/COLLARS
(3) SHROUD A BOLTS/COLLARS
8. Install the seat (page 17).