Maintenance Preparations; Seat; Fuel Tank - Honda CR250R 2004 Owner's Manual

MAINTENANCE PREPARATIONS

SEAT

Seat Removal
1. Remove the seat bolts and collars.
2. Slide the seat back.
(1) SEAT BOLTS (2) SEAT
Seat Installation
1. Slide the seat front prong onto the seat bracket and
the seat rear prong onto the tabs by pushing down
and forward on the seat in each of these areas.
2. Install the collars and tighten the seat bolts.
TORQUE: 20 lbf
2
1
(1) SEAT FRONT PRONG (2) SEAT BRACKET
(3) SEAT REAR PRONG
ft (27 N m, 2.7 kgf m)
• • •
1
3
2
4
(4) TABS

FUEL TANK

Fuel Tank Removal
1. Turn the fuel valve OFF.
2. Remove the seat (this page).
3. Remove the shroud A bolts and collars.
4. Remove the shroud B bolts, collars and shrouds.
(1) SHROUD A BOLTS/COLLARS
(2) SHROUD B BOLTS/COLLARS (3) SHROUD
5. Pull the breather tube out of the steering stem nut.
6. Unhook and remove the fuel tank band.
7. Remove the fuel tank bolt.
(1) BREATHER TUBE
(2) FUEL TANK BAND
(3) FUEL TANK BOLT
17