Navigate Menu; Readjust Time Or Datetime Of Day/Date - Siemens RMU7*B series Operating Instructions Manual

Navigate menu

Introduction
These Operating Instructions assist you in operating the controller in all standard situations (Readjust time ... etc.).
The Operating Instructions always give you the Path you need to follow through the menu to reach the relevant function – from the
start display to the adjustable value
Start display:
Wednesday 03.01.07 14:52
Welcome
« Information
Main menu »
▼
Main menu:
Main menu:
Time switch...
Room operating mode...
Controller 1...
Controller 2...
▼
Submenu:
Holidays/special days
Entry 1
––.––.––
––.––.––
▼
Setting the numerical value:
Entry 1
Start ––.––.–– ––.––
25.02
End ––.––.–– ––.––
Reason Holidays
Delete entry...
With the majority of menus, you can display information about the option currently selected.

Readjust time or dateTime of day/date

All data of the yearly time switch in your controller were
entered when your plant was commissioned. If
readjustments are required, use the Time of day / date menu.
Summer and wintertime
The same is true if you need to readjust the dates for the
start of summer and wintertime.
Note: Do not enter the actual dates of changeover but, in
accordance with international standards, the earliest
possible dates for the start of summertime and winter-time!
The change from wintertime to summertime, and vice versa, takes place automatically!
Siemens
Building Technologies
Start page
When not operated, the display always shows the start display – unless a fault has
occurred.
1. Press the OK knob: The list of menus appear.
Main menu:
2. Turn the OK knob: The cursor advances from one line to the next.
3. The selected line appears with a black background and inverse text.
4. Select the required option.
5. Confirm by pressing the OK knob.
Submenu
6. Now, you are on the submenus.
7. The 3 dots (...) after the text indicate that additional submenus follow.
8. Follow the indicated path by turning the OK knob to find the line, then push to
confirm.
––.––
9. At the end of the path you will reach the adjustable value.
––.––
Setting the numerical value
10. The numerical value appears as a pop-up
11. Adjust the value by turning the OK knob.
12. Then, confirm the value by pressing the OK knob.
13. The cursor now advances to the next value to be adjusted, or returns to the
data point if there is no other value to be adjusted.
14. Press the ESC button to return to the previous entry box or menu.
15. When you press the ESC button several times, you will reach the start display
again.
Press the INFO button.
Welcome > Main menu > Time of day/date... > ...
Path:
Operating Instructions RMU7..B
Navigate menu
The menu Time of day/date
· The time of day (e.g. 09:53)
· The date (e.g. July 25)
· The year (e.g. 2007)
· The start of daylight savings time (e.g. March 25)
· The start of standard time (e.g. October 25)
5 / 10
CE1B3144_en
2015-03-31