Copying The Keyboard Percussion Settings; Detailed Settings For Each Percussion Instrument - Yamaha STAGEA ELS-02 Owner's Manual

Copying the Keyboard Percussion
settings
You can copy the Preset Keyboard Percussion to one of
the User locations, or copy from one User location to
another. In the instructions below, Preset 1 is copied to
User 1.
1
Press the KEYBOARD PERCUSSION [1]
button to copy Preset 1.
To copy Preset 1, select the [1] button; to copy Preset
2, select the [2] button.
To copy either User location, select button [1] or [2].
2
Within the Menu buttons, select the
User location as the destination — for
example, User 1.
3
Press the [COPY FROM] button in the
display.
A list appears, letting you select the copy source
location.
4
Select the copy source (Preset 1 here)
from the list.
A message appears, prompting confirmation of the
operation.
5
Press the [COPY] button in the display
to copy Preset 1. When [COPY] is
selected, a "Completed" message
momentarily appears in the display.
Press the [CANCEL] button in the display to abort
the operation.
Detailed settings for each
percussion instrument
You can independently adjust the settings of pan, pitch,
reverb and volume for each instrument. The settings here
are system settings that cannot be memorized to
Registration memory.
1
Turn off the volume of the relevant
keyboard (the keyboard to which the
instrument to be changed is assigned).
2
Press the [SETUP] button at the top
right of the K.B.P. display to call up the
SETUP Page.
3
Press the appropriate key (the key to
which the instrument to be changed is
assigned).
The selected instrument's name is shown on the
display and you can change its settings.
The name of the
selected instrument
1
2 3 4 5
ELS-02/ELS-02C Owner's Manual
Keyboard Percussion
6
83
5