Table of Contents
Advertisement
Connecting by the Ad Hoc Mode
1
Set the Wireless LAN mode to "Ad Hoc
Mode."
Refer to "Wireless LAN Mode. "
2
The settings for the instrument are
complete if you do not need to change
the SSID and so on. Connect the
iPhone/iPad to the instrument by
referring to the "iPhone/iPad
Connection Manual."
You can change the SSID, Security, etc. from the
DETAIL display.
Reference Page
• Wireless LAN Detailed Settings (page 198)
Wireless LAN Mode
1
Perform the same operation as in steps
1 – 3 in the "Displaying available
networks in the wireless LAN and
connecting to a network" instructions
on page 195.
2
Set the Wireless LAN mode.
You can set between two modes:
INFRASTRUCTURE and AD HOC. Press the
[MODE CHANGE] button on the display to call up
a message prompting confirmation of the operation,
then press the [OK] button to execute the operation.
Connecting to an iPhone/iPad
ELS-02/ELS-02C Owner's Manual
13
197
Advertisement
Table of Contents
