Page 1 E-MANUAL imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model __________ Serial No. ____________...
Page 2: Table Of Contents
Contents Channel • Using the INFO button (Now & Next guide) 3 • Using the Channel Menu • Using the Channel • Using Favourites Channels • Memorizing Channels • Other Features Basic Features • Changing the Preset Picture Mode • Adjusting Picture Settings • Changing the Picture Size • Changing the Picture Options • Setting up the TV with Your PC...
Page 3: Channel
❑ Using the INFO button (Now & Next guide) The display identifies the current channel and the status of certain audio-video settings. The Now & Next guide shows daily TV programme information for each channel according to the broadcasting time. ●...
Page 4: Using The Channel Menu
English Search Your Video Samsung Apps Connect to the Internet and enjoy a variety of contents throuth SMART HUB. This feature may not be available in some countries. For some of the countries listed, local language characters might not be displayed properly.
Page 5: Schedule Manager
Using Channel View (Sche. Mgr): Displays the Schedule Manager. Green (-24 Hours): Viewing the list of programmes to be broadcasted before 24 hours. Yellow (+24 Hours): Viewing the list of programmes to be broadcasted ◀ after 24 hours. Guide DTV Air 05.1 Globo HD TELA QUENTE (HD) 10:05 pm - 12:10 pm DESVENTURAS EM SERIE (HD)
Page 6 Blue (Ch. Mode): Select the type of channels you want to display on the Channel View window. `Information: Displays details of the selected programme. Page: Move to next or previous page. Watch: When selecting the current programme, you can watch the selected programme.
Page 7 Schedule Manager ■ SMART HUB You can view, modify or delete a channel you have reserved to watch. Using the Timer Viewing You can set a desired channel to be displayed automatically at the intended time. Set the current time first to use this function. 1.
Page 8 4. Press the Time. ● Antenna: Select the desired antenna source. ● Channel: Select the desired channel. ● Repeat: Select Once, Manual, Sat~Sun, convenience. If you select Manual, you can set the day you want. mark indicates the date is selected. ●...
Page 9 Press INFO to enter screen, you can change or cancel a reserved information. ● Cancel Schedules: Cancel a show you have reserved to watch. ● Edit: Change a show you have reserved to watch. ● Return: Return to the previous screen. Only memorised channels can be reserved.
Page 10 Using the Timer Recording Allows you to make a reservation to record a programme scheduled for broadcast. Set the current time first to use this function. button also controls recording. ∏ 1. Press the ENTERE Manager screen will be displayed. 2.
Page 11 3. Press the button to select the We recommend using a USB HDD with at least 5,400 rpm, but a USB HDD of RAID type is not supported. A USB storage device cannot record until it completes the Performance USB memory stick is not compatible. 4.
Page 12: Channel List
Channel List ■ You can view all the channel searched. When you press the remote control, displayed at once. ◀ CH LIST button on the screen will be Channel List English Channel List All Channel TV #6 No Information TV #10 TV #11 10-1 TV #12...
Page 13 Using the operation buttons with the ● Red (Antenna): Select the desired antenna source. The option may differ depending on country. ● Yellow (Programme View digital channel is selected. Returns to the channel view. ● Mode: Move to the type of channels you want to display on the Channel List screen.
Page 14: Using The Channel
❑ Using the Channel Channel ■ Delete added channels or set favourites channels and use the programme guide for digital broadcasts. Select a channel in the Channels, Analogue, TV, Other screen. Change the antenna, or channel settings using the menus in the top right corner ◀...
Page 15 Antenna: Select the desired antenna source. The option may differ depending on country. Sort: Change the list ordered by channel name or channel number. Edit Mode: Delete channels assigned to Favourites. Refer to “Using the Favourite Channels” for details on how to assign a channel to Favourites. Setting channels you watch frequently as Favourites.
Page 16 2. Press the arrow buttons to select a channel as a Favourites, and then press ENTERE. A check appears to the left of the channel. You can select more than one channel. Pressing 3. Select Edit Favourites ENTERE ◀ ENTERE again deselects the channel.
Page 17 4. Highlight a group on the Favourites list, and then press ENTERE. Edit Favourites etc.). You can add a Favourite channel to any one of the groups. Select a group using the up and down arrows on your remote. 5. Select OK, press ENTERE, and then press 6.
Page 18 ● Using Edit Mode 1. Select the press the 2. Press the ENTERE. A check appears to the left of the channel. You can select more than one channel. Pressing 3. Select Delete ◀ A pop-up appears asking if you want to delete the item. to Delete a Channel from the Channel List Edit Mode icon on the upper right of your screen, and then...
Page 19 4. Select OK, press ENTERE, and then press channel is deleted from the 5. Press ENTERE The Deselect function that appears with the Delete function lets you deselect all selected channels. ● Select All: Select all the channels. ◀ Channel List.
Page 20 Using the TOOLS ● Favourites: Set channels you watch frequently as favourites. Edit 1. Select the Edit 2. Press the ENTERE button. One favourites channel can be added in several of favourites channels among Favourites ● / Unlock: Lock a channel so that the channel cannot be selected and Lock ◀...
Page 21 NOTE ● This function is available only when the ● Edit Channel Name This function may not be supported depending on the region. ◀ Channel Lock (analogue channels only): Assign your own channel name. English is set to On. ▶...
Page 22 ● Edit Channel desired. This function may not be supported depending on the region. ● Upcoming Programme channel name or channel number. ● Search (when the ● Reorder (when the manager in numerical order. ◀ ● Delete: Delete a channel to display the channels you want. Number: Edit the number by pressing the number buttons (digital channels only): Change the list ordered by Antenna...
Page 23 Channel Status Display Icons Icon Operations An analogue channel. A channel selected. A channel set as a Favourites. A locked channel. ◀ English ▶...
Page 24: Using Favourites Channels
❑ Using Favourites Channels Favourites ■ SMART HUB Shows all favourite channels. ● Edit favourites selected channels to desired Favourites group. ◀ The “F” symbol wil be displayed and the channel will be set as a Favourites. → → Favourites ENTERE t: You can set the English...
Page 25 1. On the Channel and press the If you want to add multiple channels, use the right corner of the 2. Add or delete a channel in the favourite groups you want among 1, 2, 3, 4 and 5. One or more groups can be selected. ◀...
Page 26: Memorizing Channels
❑ Memorizing Channels → MENUm Channel Antenna ■ The option may differ depending on country. Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV. ◀ → ENTERE English ▶...
Page 27 Country ■ Select your country so that the TV can correctly auto-tune the broadcasting channels. ● Channel: Change the country for digital channels. Digital ● Analogue Channel: Change the country for analogue channels. ◀ English ▶...
Page 28 Auto Tuning ■ Scans for a channel automatically and stores in the TV. Automatically allocated programme numbers may not correspond to actual or desired programme numbers. If a channel is locked using the function, the PIN input window appears. ● Cable / Satellite: Select the antenna source to memorise.
Page 29 When Antenna Source is set to ● Digital & Analogue memorise. When selecting value to scan for cable channels. ● Search Mode (Full broadcast stations and stores them in the TV. If you select Quick, you can set up the Network, Modulation, and ◀...
Page 30 Network ID: When Network is Manual, you can set up Network ID using the numeric buttons. Frequency: Displays the frequency for the channel. (differs in each country) Modulation: Displays available modulation values. Rate: Displays available symbol rates. Symbol ◀ ▶ English...
Page 31 When Antenna Source is set to Satellite: ● Channel Type (All ● Satellite: Selects the satellite to scan. The option may differ depending on country. ● Scan Mode (All Channels of the selected satellite. ◀ / Radio): Select the Free Channels English to memorise.
Page 32 Manual Tuning ■ Scans for a channel manually and stores in the TV. If a channel is locked using the appears. This function may not be supported depending on the region. When Antenna Source is set to ● Digital Channel ◀...
Page 33 2. Press the channel is updated in the channel list. ● Analogue Channel 1. Press the 2. Set the Programme, Search. 3. Press the channel is updated in the channel list. ◀ button to select Search. When scanning has finnished, a Tuning: Scans for a analogue channel.
Page 34 Channel mode ● (programme mode): When tuning is complete, the broadcasting stations in your area have been assigned to position numbers from P0 to P99. You can select a channel by entering the position number in this mode. ● (aerial channel mode) / you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel.
Page 35 When Antenna Source is set to Satellite: ● Transponder: Selects the transponder using the up/down buttons. ● Scan Mode (All Channels channels to store. ● Network Search (Disable the up/down buttons. ● Quality: Display the current status of broadcasting signal. Signal Information on a satellite and its transponder is subject to change depending ◀...
Page 36 Genre Selection ■ Genre Selection ● Genre Selection (Off when using the guide. Satellite System ■ Satellite System Auto Store, set Satellite ◀ ● Satellite Selection: You can choose the satellites for this TV. ● LNB Power (Off for U.K is available when Antenna / On): Turn the channel-genre selection feature on or off...
Page 37 ● Settings: Configures the outdoor equipment. – Satellite: Selects the satellite for receiving digital broadcasts. – Transponder: Selects a transponder from the list or adds a new transponder. – DiSEqC Mode: Selects DiSEqC mode for the selected LNB. – Lower LNB –...
Page 38 ● SatCR/Unicable This function may not support depending on the region. – SatCR/Unicable: Enables or disable single cable installation support. – Slot Number: Select the SatCR user slot number for this receiver. – Slot Frequency: Enter the appropriate frequency to receive the signal from SatCR.
Page 39 ● Positioner Settings: Configures the antenna positioner. Positioner (On Positioner Type (USALS DiSEqC 1.2 and USALS(Universal Satellite Automatic Location System). – Longitude: Sets the longitude for my location. – Latitude: Sets the latitude for my location. – Satellite Longitude ◀ / Off): Enables or disables the positioned control.
Page 40 User Mode: Sets the position of satellite antenna according to each satellite. If you store the current position of satellite antenna according to a certain satellite, when the signal of that satellite is needed, the satellite antenna can be moved to pre-populated position. –...
Page 41 – Go to Stored – Position: Adjusts and stores the antenna position for the selected Antenna satellite. – Store Current limit. – Signal Quality: Display the current status of broadcasting signal. ◀ Position: Rotates the antenna to the stored satellite position. Position: Stores current position as the selected positioner English ▶...
Page 42 Installer Mode: Sets limits to the scope of movement of satellite antenna or reset the position. Generally, installation guide uses this function. – Limit Position (East – Antenna Position: Adjusts and stores the antenna position for the selected satellite. – Store Current positioner Limit.
Page 43: Other Features
Channel Guide Type (Samsung ■ (depending on the country) You can select a different type of Guide. ● Samsung: Uses the guide programme by provided samsung. ● Rovi On Screen: Uses the guide programme provided by Rovi International ◀ Solutions.
Page 44 Transfer Channel List ■ Imports or exports the channel map. You should connect a USB storage to use this function. ● Import from USB: Import channel list from USB. ● Export to USB: Export channel list to USB. This function is available when USB is connected.
Page 45 Fine Tune ■ (analogue channels only) If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel manually. Scroll to the left or right until the image is clear.
Page 46: Basic Features
❑ Changing the Preset Picture Mode → MENUm Picture Picture Mode ■ Select your preferred picture type. When connecting a PC, the Entertain. ● Dynamic: Suitable for a bright room. ◀ ● Standard: Suitable for a normal environment. ● Natural for LED TV ●...
Page 47: Adjusting Picture Settings
❑ Adjusting Picture Settings → MENUm Picture Backlight ■ for LED TV Colour Tint (G/R) Your television has several setting options for picture quality control. In analogue TV, Ext., not available. ◀ When connecting a PC, you can only make changes to Cell Light for PDP TV Settings can be adjusted and stored for each external device connected to the...
Page 48: Changing The Picture Size
❑ Changing the Picture Size → MENUm Picture Screen Adjustment ■ ● Picture Size: Your cable box / satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time.
Page 49 – Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size. – 4:3: The default setting for a movie or normal broadcasting. Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and centre of the screen may cause image retention (screen burn) which are not covered by the warranty.
Page 50 – Smart View – Smart View Smart View 1 Smart View 2 The picture size can vary depending on the input resolution when content is played using ◀ 1: Reduces the 16:9 picture by 50% 2: Reduces the 16:9 picture by 25% is enabled only in HDMI mode.
Page 51 NOTE ● When Double (à, Œ) mode has been set in PIP (Picture-in-Picture), the Picture Size cannot be set. ● Depending on the input source, the picture size options may vary. ● The available items may differ depending on the selected mode. ●...
Page 52 ● After selecting 1. Press the 2. Press the ENTERE 3. Press the 4. Press the ENTERE 5. Select Close picture position, press Reset. ◀ Zoom Wide Zoom: button to select Position. button. button to move the picture up or down. button.
Page 53 ● After selecting 1080p) mode, you may need to centre the picture: 1. Press the 2. Press the ENTERE 3. Press the u, d, 4. Press the ENTERE 5. Select Close picture position, press Reset. ◀ Screen Fit in HDMI (1080i / 1080p) or Component (1080i / button to select Position.
Page 54 ● HD (High Definition): 16:9 - 1080i / 1080p (1920 x 1080), 720p (1280 x 720) ● Settings can be adjusted and stored for each external device you have connected to an input on the TV. AV, Component (480i, 480p, 576i, 576p) DTV (720p, 1080i, 1080p) Component (720p, 1080i, 1080p) HDMI (720p, 1080i, 1080p)
Page 55 ● 4:3 Screen Size (16:9 Wide Zoom Zoom / 4:3): Available only when picture size is set to Auto Wide. You can determine the desired picture size at the 4:3 WSS (Wide Screen Service) size or the original size. Each European country requires different picture size.
Page 56: Changing The Picture Options
❑ Changing the Picture Options Advanced Settings ■ → MENUm Picture ENTERE (Advanced Settings Movie mode) You can adjust the detailed setting for the screen ◀ including colour and contrast. When connecting a PC, you can only make changes to Gamma →...
Page 57 ● Black Tone (Off screen depth. ● Dynamic Contrast (Off ● Shadow Detail ● Gamma: Adjust the primary colour intensity. ● Expert Pattern (Off function, the picture can be calibrated without a generator or filter. If the OSD menu disappears or a menu other than the Picture menu is opened, the ◀...
Page 58 ● RGB Only Mode (Off Blue colour for making fine adjustments to the hue and saturation. ● Colour Space (Auto to create the image. To adjust Colour, Red, Green, Custom. ● Balance: Adjust the colour temperature for a more natural picture. White R-Offset G-Offset...
Page 59 ● 10p White Balance (Off by adjusting the red, green, and blue brightness. Available when the picture mode is set to input is set to all input. Some external devices may not support this function. Interval: Select interval to adjust. Red: Adjust the red level.
Page 60 ● Flesh Tone: Emphasize pink “Flesh Tone”. ● Edge Enhancement (Off ● Motion Lighting (Off is not supported. When changing a setting value of Brightness ◀ / On): Emphasize object boundaries. / On): Reduce power consumption by brightness control. Backlight or Contrast, Motion Lighting English...
Page 61 ● xvYCC (Off / On): Setting the space when watching movies from an external device (e.g. DVD player) connected to the HDMI or Component IN jacks. Available when the picture mode is set to input is set to HDMI or Component. Some external devices may not support this function.
Page 62: Picture Options
Picture Options ■ → MENUm Picture When connecting a PC, you can only make changes to the Colour Tone. ● Colour Tone (Cool Warm1 Warm2 picture mode is Dynamic. Settings can be adjusted and stored for each ◀ external device connected to an input on the TV. →...
Page 63 ● Digital Noise Filter (Off Medium High Auto Auto Visualisation): When the broadcast signal is weak, some static and ghosting may appear. Select one of the options until the best picture is displayed. Auto Visualisation: When changing analogue channels, displays the intensity of the current signal and defines the screen noise filter.
Page 64 ● MPEG Noise Filter (Off to provide improved picture quality. ● HDMI Black Level (Low adjust the screen depth. Available only in HDMI mode (RGB signals). ● Film Mode (Off automatically sense and process film signals from all sources and adjust the picture for optimum quality.
Page 65 ● Motion Plus (Off : Removes drag from fast scenes with a lot of movement to provide a clearer picture. The Info screen on your TV displays the resolution and frequency of the incoming signal (60Hz), but not the frequency the TV is generating for the image it is displaying by using If noise occurs on the screen, please set up the Motion Plus...
Page 66 Blur Reduction: Adjusts the blur reduction level from video sources. Reduction: Adjusts the judder reduction level from video sources when Judder playing films. Reset: Reset the custom settings. ◀ ▶ English...
Page 67 Reset Picture (Yes / No) ■ Resets your current picture mode to its default settings. ◀ ▶ English...
Page 68: Setting Up The Tv With Your Pc
❑ Setting up the TV with Your PC Set the input source to PC. Auto Adjustment ■ → MENUm Picture Adjust frequency values/positions and fine tune the settings automatically. Not available when connecting with an HDMI to DVI cable. ◀ →...
Page 69 PC Screen Adjustment ■ → MENUm Picture ENTERE ● Coarse / Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture so that it is aligned to the centre of screen.
Page 70 Depending on the version of Windows and the video card, the actual screens on your PC may differ in which case the same basic set-up information will almost always be applied. (If not, contact your computer manufacturer or Samsung Dealer.) 1. Click on “Control Panel” on the Windows start menu.
Page 71 4. Navigate to the “Settings” tab on the display dialog-box. ● The correct size setting (resolution) [Optimum: 1920 X 1080 pixels] ● If a vertical-frequency option exists on your display settings dialog box, the correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box.
Page 72: Changing The Preset Sound Mode
❑ Changing the Preset Sound Mode → MENUm Sound Sound Mode ■ ● Standard: Selects the normal sound mode. ● Music: Emphasizes music over voices. ● Movie: Provides the best sound for movies. ● Clear Voice: Emphasizes voices over other sounds. ◀...
Page 73: Adjusting Sound Settings
❑ Adjusting Sound Settings → MENUm Sound Sound Effect ■ ● SRS TruSurround HD (Off (standard sound mode only) This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF (Head Related Transfer Function) technology. ◀...
Page 74 ● SRS TruDialog (Off (standard sound mode only) This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be heard more clearly. Speaker Select ● SRS CS Headphone: You can hear virtual 5.1ch surround sound over the headphones.
Page 75 ● Equalizer Adjusts the sound mode (standard sound mode only). – Balance L/R: Adjusts the balance between the right and left speaker. – 100Hz 300Hz the level of specific bandwidth frequencies. – Reset: Resets the equalizer to its default settings. Speaker Select ◀...
Page 76 3D Audio (Off Medium / High) ■ 3D audio technology provides the immersive sound corresponding to the pop-up effect of 3D video by audio depth control in perspective. Available in only when watching 3D image. ◀ ▶ English...
Page 77 Broadcast Audio Options ■ ● Audio Language (digital channels only) Change the default value for audio languages. The available language may differ depending on the broadcast. ◀ ▶ English...
Page 78 ● Audio Format (digital channels only) When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver. In this case, use the TV Speaker function. Audio Format digital sound is only available when connecting an external speaker through an optical cable.
Page 79 ● Audio Description (not available in all locations) (digital channels only) This function handles the Audio Stream for the AD (Audio Description) which is sent along with the Main audio from the broadcaster. Audio Description (Off Volume: Adjust the audio description volume. ◀...
Page 80 Additional Setting ■ (digital channels only) ● DTV Audio Level (MPEG disparity of a voice signal (which is one of the signals received during a digital TV broadcast) to a desired level. According to the type of broadcast signal, adjusted between -10dB and 0dB. To increase or decrease the volume, adjust between the range 0 and -10 ◀...
Page 81 ● SPDIF Output: SPDIF (Sony Philips Digital InterFace) is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player. Audio Format: You can select the Digital Audio output (SPDIF) format. The available Digital Audio output (SPDIF) format may differ depending on the input source Audio Delay: Correct audio-video sync problems, when watching TV or video,...
Page 82 ● Dolby Digital Comp (Line between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound). Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night time. Line: Set the output level for signals greater or less than -31dB (reference) to either -20dB or -31dB.
Page 83 Speaker Settings ■ ● Speaker Select (External Speaker A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to Speaker. When Speaker Select buttons will not operate and the sound settings will be limited. When Speaker Select ◀...
Page 84 When Speaker Select ● Speaker: On, If there is no video signal, both speakers will be mute. ● Auto Volume (Off To equalize the volume level on each channel, set to Normal. Night: This mode provides an improved sound experience compared to mode, making almost no noise.
Page 85 Reset Sound (Yes / No) ■ Reset all sound settings to the factory defaults. ◀ ▶ English...
Page 86: Selecting The Sound Mode
❑ Selecting the Sound Mode When you set to Dual A2 Stereo ◀ NICAM Stereo f-g, the current sound mode is displayed on the screen. Audio Type Dual 1 / 2 Mono Stereo STEREO Dual DUAL Mono Stereo MONO MONO Dual DUAL English...
Page 87 If the stereo signal is weak and an automatic switching, occurs, then switch to the mono. Only activated in stereo sound signal. Only available when the ◀ Source is set to TV. English ▶...
Page 88: Preference
Preference ❑ Connecting to a Wired Network You can attach your TV to your LAN using cable in three ways: ● You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a LAN cable. See the diagram below. The Modem Port on the Wall External Modem TV Rear Panel...
Page 89 ● You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected to an external modem. Use LAN cable for the connection. See the diagram below. The Modem Port on the Wall TV Rear Panel...
Page 90 ● Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN port on the back of your TV directly to a network wall outlet using a LAN cable. See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere in your house.
Page 91 ● If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your TV needs to access the Internet so you do not have to enter them manually.
Page 92: Setting The Network
❑ Setting the Network Network Settings ■ → MENUm Network Set the network connection to use various Internet services such as AllShare™ and perform software upgrade. Network Status ■ → ◀ MENUm Network You can check the current network and Internet status. →...
Page 93 AllShare Settings ■ → MENUm Network Selects whether to use media functions on the network. SWL(Samsung Wireless Link) ■ → MENUm Network You can connect TV to wireless mobile device easily. ◀ → → AllShare Settings → SWL(Samsung Wireless Link)
Page 94 Network Setup (Auto) ■ Use the Automatic Network Setup when connecting your TV to a network that supports DHCP. To set up your TV’s cable network connection automatically, follow these steps: How to set up automatically 1. Go to Network Settings follow the directions of ◀...
Page 95 If it fails to set automatically, check the connection of LAN port. If you cannot find network connection values or if you want to set connection manually, set it to Manual. Refer to following “How to set up manually”. ◀ Network Setting Wiress network and Internet connection completed.
Page 96 Network Settings ■ Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address. Getting the Network Connection Values To get the Network connection values on most Windows computers, follow these steps: 1. Right click the Network icon on the bottom right of the screen. ◀...
Page 97 How to set up manually To set up your TV’s cable network connection manually, follow these steps: 1. Follow Steps 1 through 2 in the “How to set up automatically” procedure. 2. Select the IP Setting 3. Set IP Mode to Manual.
Page 98 5. Enter the Address, number buttons on your remote to enter numbers and the arrow buttons to move from one entry field to another. 6. When done, select the OK. 7. The network test screen appears, and network setting is done. ◀...
Page 99: Connecting To A Wireless Network
❑ Connecting to a Wireless Network You can connect your TV to your LAN through a standard wireless router or modem. The LAN Port on the Wall Wireless IP sharer (router having DHCP server) ◀ ▶ LAN Cable English...
Page 100 TV supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using IEEE 802.11n. When you play video over a network connection, the video may not played smoothly. NOTE ● To use a wireless network, your TV must be connected to a wireless IP sharer (either a router or a modem).
Page 101 ● If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or TKIP AES (WPS2Mixed) for your AP, Samsung TVs will not support a connection in compliance with new Wi-Fi certification specifications. ●...
Page 102 Connection Methods: You can setup the wireless network connection on six ways. – Auto Setup (Using the Auto Network Search function) – Manual Setup – WPS(PBC) – Ad Hoc – One Foot Connection ◀ – SWL(Samsung Wireless Link) English ▶...
Page 103 Network Setup (Auto) ■ Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up security for your wireless network.
Page 104: Network Settings
How to set up automatically 1. Go to Network Settings follow the directions of 2. Select the Wireless 3. The Network function searches for available wireless networks. When done, it displays a list of the available networks. 4. In the list of networks, press the ◀...
Page 105 5. If the Security router which does not have security, go to step 7. 6. If the wireless router has security, enter the Security key (Security or PIN), then select Next. When you enter the Security key(Security or PIN), use on your remote to select number/ characters.
Page 106 7. The network connection screen appears, and network setting is done. If it fails to set Security key(Security or PIN), select If you want to set connection manually, select the following “How to set up manually”. ◀ Reset Settings. Refer to English Settings.
Page 107 Getting the Network Connection Values To get the Network connection values on most Windows computers, follow these steps: 1. Right click the Network icon on the bottom right of the screen. 2. In the pop-up menu that appears, click Status. 3.
Page 108 How to set up manually To set up your TV’s cable network connection manually, follow these steps: 1. Follow Steps 1 through 7 in the “How to set up automatically” procedure. 2. Select the IP Settings 3. Set IP Mode to Manual.
Page 109 5. Enter the Address, the number buttons on your remote to enter numbers and the arrow buttons to move from one entry field to another. 6. When done, select the OK. 7. The network connection screen appears, and network setting is done. ◀...
Page 110 Network Setup (WPS(PBC)) ■ How to set up using WPS(PBC) If your router has a WPS(PBC) button, follow these steps: 1. Go to Network Settings follow the directions of 2. Select the WPS(PBC). ◀ 3. Press the WPS(PBC) button on your router within 2 minutes.
Page 111 This function is available when How to set up using ◀ 1. Go to Network Settings → ENTERE). 2. Select Wireless SWL (Samsung Wireless Link) Ad hoc screen. (MENUm (General), and press ENTERE, then press English is set to Off. →...
Page 112 3. Select hoc. The message with Wi-Fi compatible devices like a cell phone or PC. Other network services may be limited. Do you want to change the network is displayed. 4. Select OK, and press ENTERE. The TV searches for the mobile device. 5.
Page 113 You can check for equipment that supports One Foot Connection on www.samsung.com ◀ Connection) makes it simple to connect Samsung TV to your One Foot Connection, you must connect using English ▶...
Page 114 How to set up using One Foot Connection Turn on the power of wireless router and TV. 1. Go to Network Settings follow the directions of 2. Select the One Foot 3. Place the wireless router in close proximity with the TV near the WiFi transmitter giving a gap no more than 25cm.
Page 115 One Foot Connection window appears on the screen notifying you of the failure. If you want to try using One Foot Connection TV and then try again from Step 1. You can also choose one of the other connection setup methods. 4.
Page 116 SWL(Samsung Wireless Link) ■ This function lets you connect a Samsung device that supports the your TV. You can connect devices to the TV even if a sharer is not connected to the TV. For the TV to use network.
Page 117 If Your TV Fails to Connect to the Internet Your TV may not be able to connect to the Internet because your ISP has permanently reg- istered the MAC address (a unique identifying number) of your PC or modem, which it then authenticates each time you connect to the Internet as a way of preventing unauthorized access.
Page 118: Setting The Time
❑ Setting the Time → MENUm System Time ■ ● Clock: Setting the clock is for using various timer features of the TV. The current time will appear every time you press the If you disconnect the power cord, you have to set the clock again. –...
Page 119 Manual: Set the current time manually. Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually. – Set: Set the Clock Available only when You can set the on the remote control.
Page 120 – GMT (GMT-3:00 GMT+3:00 GMT+8:00 Selects your time zone. When Country – DST (Daylight Saving Time) (Off function on or off. ◀ GMT-2:00 GMT-1:00 GMT+4:00 GMT+5:00 GMT+9:00 GMT+10:00 is set to Others, you can use this function. / On): Switches the Daylight Saving Time English GMT+1:00 GMT+2:00...
Page 121 Using the Sleep Timer → MENUm System ● Sleep Timer t: Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes). To cancel Sleep ◀ → → Time Sleep Timer Timer, select Off. English →...
Page 122 Setting the On / Off Timer → MENUm System ● On Timer 1 On Timer 2 Three different on timer settings can be made. You must set the clock first. Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, set at you convenience. If you select Manual, ◀...
Page 123 Time: Set the hour and minute. Volume: Set the desired volume level. Source: Select content to be played when the TV is turned on automatically. (USB can be selected only when a USB device is connected to the TV) Antenna (when the Source is set to TV): Select...
Page 124 NOTE ● If there is no music file on the USB device or the folder containing a music file is not selected, the Timer function does not operate correctly. ● When there is only one photo file in the USB, the Slide Show will not play.
Page 125 ● Each USB you use is assigned its own folder. When using more than one of the same type of USB, make sure the folders assigned to each USB have different names. ● It is recommended that you use a USB memory stick and a multi card reader when using with USB devices with a built-in battery, MP3 players, or PMPs made by some manufacturers because these devices take a long time to be...
Page 126 ● Off Timer 1 Off Timer 2 Three different off timer settings can be made. You must set the clock first. Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, set at you convenience. If you select Manual, you can set up the day you want to activate the timer.
Page 127: Locking Programme
❑ Locking Programme → MENUm System Security ■ The PIN input screen appears before the setup screen. Enter your 4-digit PIN. Change the PIN using the ◀ → → Security ENTERE English Change PIN option. ▶...
Page 128 ● Channel Lock (Off unauthorized users, such as children, from watching unsuitable programme. Available only when the ● Program Rating Lock users, such as children, from watching unsuitable programme with a user- defined 4-digit PIN code. If the selected channel is locked, the “\” symbol will be displayed.
Page 129 ● Change PIN: Change your personal ID number required to set up the TV. ● Adult genre enabling (Off Adult genre enabling ◀ / On): You can adjust the is available for Freesat English Adult genre enabling. antenna only. ▶...
Page 130 How to watch a restricted channel If the TV is tuned to a restricted channel, the will block it. Program Rating Lock The screen will go blank and the following message will appear: This channel is blocked by Program Rating Lock.
Page 131: Economical Solutions
❑ Economical Solutions Eco Solution ■ → MENUm System ● Energy Saving (Off adjusts the brightness of the TV in order to reduce power consumption. If you select Picture any button except volume button to turn on the screen. ◀ →...
Page 132 ● Eco Sensor (Off automatically adapt to the light in the room. If you adjust the will be set to Off. Min Backlight the minimum screen brightness can be adjusted manually. Eco Sensor darker or brighter) depending on the surrounding light intensity. ◀...
Page 133 ● No-Signal Power Off (Off energy consumption, set how long you want the TV to remain on if it’s not receiving a signal. Disabled when the PC is in power saving mode. ● Auto Power Off (Off of being left idle to prevent overheating. ◀...
Page 134 Auto Protection Time (2 hours 4 hours 8 hours 10 hours / Off) ■ for LED TV If the screen remains idle with a still image for a certain period of time defined by the user, the screen saver is activated to prevent the formation of ghost images on the screen.
Page 135 Screen Burn Protection ■ To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. The Time setting allows you to programme the time between movement of the picture in minutes. ● Pixel Shift (Off PDP in horizontal or vertical direction to minimize after image on the screen.
Page 136 Pixel Shift mode. This function is not available in the ● Auto Protection Time (Off remains idle with a still image for a certain period of time defined by the user, the screen saver is activated to prevent the formation of ghost images on the screen.
Page 137 The after-image removal function has to be executed for a long time (approximately 1 hour) to effectively remove after-images on the screen. If the after-image is not removed after performing the function, repeat the function again. Press any key on the remote control to cancel this feature. ●...
Page 138: Other Features
❑ Other Features → MENUm System Language ■ ● Menu Language: Set the menu language. ● Teletext Language: Set a desired language for teletext. English is the default in cases where the selected language is unavailable in the broadcast. ◀ ●...
Page 139 Subtitle ■ Use this menu to set the ● Subtitle (Off / On): Switches subtitles on or off. ● Mode (Normal ● Subtitle Language: Sets the subtitle language. If the programme you are watching does not support the function, Normal mode is selected.
Page 140 Digital Text (Disable / Enable) ■ for U.K If the programme broadcasts with digital text, this feature is enabled. MHEG (Multimedia and Hypermedia Information Coding Experts Group): An International standard for data encoding systems used in multimedia and hypermedia. This is at a higher level than the MPEG system which includes data- linking hypermedia such as still images, character service, animation, graphic and video files as well as multimedia data.
Page 141 General ■ ● Game Mode (Off PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting game mode. NOTE ● Precautions and limitations for game mode – To disconnect the game console and connect another external device, Game Mode ◀...
Page 142 ● Game Mode ● After connecting the game console, set Unfortunately, you may notice reduced picture quality. ● Game Mode – Picture Mode – Equalizer ◀ is not available when the input source is set to TV or PC. is On: is set to Standard is not available.
Page 143 BD Wise to the optimal resolution. Available when connecting Samsung products that support through a HDMI cable. ◀ / On): Provides the optimal picture quality for Samsung is turned On, the picture mode is automatically changed English Wise. BD Wise...
Page 144 If you select User Input, you can type on the TV using the OSK (On Screen ◀ Keyboard). In Standby Watching TV to reduce the power consumption. / On): Display Samsung logo when the TV is turned on. English / Always) : You can for LED 8000 ▶...
Page 145 Anynet+(HDMI-CEC) ■ For details on set up options, refer to the “Anynet+(HDMI-CEC)” instructions. ◀ ▶ English...
Page 146 DivX® Video On Demand ■ Shows the registration code authorized for the TV. If you connect to the DivX web site and register, you can download the VOD registration file. If you play the VOD registration using Videos under SMART HUB, the registration is completed.
Page 147 Network Remote Control (Off / On) ■ Turn on/off or give permission to Samsung mobile phones devices. You must have a Samsung Mobile phone / device which supports Wireless Remote Control. For more details, refer to each device’s manual. ◀...
Page 148 Common Interface ■ ● Menu: This enables the user to select from the CAM-provided menu. Select the CI Menu based on the menu PC Card. ● Application Info: View information on the CAM inserted into the CI slot and on the “CI or CI+ CARD”...
Page 149: Picture In Picture (Pip)
❑ Picture In Picture (PIP) → MENUm System ■ You can watch the TV tuner and one external video source simultaneously. (Picture-in-Picture) does not function in the same mode. NOTE ● When Double (à, Œ) mode has been set in PIP, the Picture Size cannot ◀...
Page 150 ● You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke. ● While Channel Lock cannot be used. ● PIP settings Component, HDMI, PC ◀ SMART HUB Main picture English...
Page 151 ● PIP (Off / On): Activate or deactivate the PIP function. ● Channel: Select the channel for the sub-screen. ● Size (õ ● Position (ã ● Double (à, Œ) mode, Position cannot be selected. ● Sound Select (Main Sub) in ◀...
Page 152: Support
❑ Support e-Manual ■ → MENUm Support You can read the introduction and instructions about the TV features stored in your For the detailed information about e-Manual Screen, refer to “How to view the e-Manual” in User Manual. ◀ → →...
Page 153 ● Picture Test (Yes ● Yes: If the test pattern does not appear or there is noise in the test pattern, select Yes. There may be a problem with the TV. Contact Samsung’s Call Centre for assistance. ◀ ● No: If the test pattern is properly displayed, select No. There may be a problem with your external equipment.
Page 154 Yes: If you can hear sound only from one speaker or not at all during the sound test, select Yes. There may be a problem with the TV. Contact ◀ Samsung’s Call Centre for assistance. ● No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment.
Page 155 Adjust your antenna to increase signal strength. ● Troubleshooting: If the TV seems to have a problem, refer to this description. If none of these troubleshooting tips apply, contact the Samsung customer service centre. ◀ English...
Page 156 Software Upgrade ■ Software Upgrade can be performed via a broadcasting signal or by network connection or downloading the latest firmware from “www.samsung.com” to a USB memory device. ◀ ▶ English...
Page 157 ● USB: Insert a USB drive containing the firmware upgrade file, downloaded from “www.samsung.com,” into the TV. Please be careful not to disconnect the power or remove the USB drive until upgrades are complete. The TV will be turned off and on ●...
Page 158 ● Online: Upgrade the software using the Internet. First, configure your network. For detailed procedures on using the Network Setup, refer to the “Network Connection” instructions. If the internet connection doesn’t operate properly, the connection may be broken. Please retry downloading. If the problem persists, download by USB and upgrade.
Page 159 ● Alternative Software is affecting operation, you can change the software to the previous version. If the software was changed, existing software is displayed. ● Standby Mode at selected time. Since the power of the unit is turned on internally, the screen may be turned on slightly for the product.
Page 160 Contact Samsung ■ View this information when your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centres, and how to download products and software. ◀ ▶ English...
Page 161: Advanced Features
❑ Using the 3D function → MENUm Picture ■ This exciting new feature enables you to view 3D content. In order to fully enjoy this feature, you must purchase a pair of Samsung 3D Active Glasses to view 3D video. ◀ → → ENTERE English ▶...
Page 162: Viewing Tv Using The 3D Function
❑ Viewing TV using the 3D function IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES. Read and understand the following safety information before using the TV’s 3D function. WARNING ● Some viewers may experience discomfort while viewing 3D TV such as dizziness, nausea and headaches.
Page 163 ● A responsible adult should frequently check on children who are using the 3D function. If there are any reports of tired eyes, headaches, dizziness, or nausea, have the child stop viewing 3D TV and rest. ● Do not use the 3D Active Glasses for other purposes (such as general eyeglasses, sunglasses, protective goggles, etc.) ●...
Page 164 ● Mode: Select the 3D input format. If you want to feel the 3D effect fully, please wear the 3D Active Glasses first, and then select 3D Mode from the list below that provides the best 3d viewing experience. When watching 3D images, turn on 3D Active Glasses. 3D Mode ◀...
Page 165 3D Mode Vertical Stripe Checker Board Frame Sequential ◀ Operation Displays the images for the left and right eye alternately in for LED TV columns. Displays the images for the left and right eye alternately in for LED TV pixels. Displays the images for the left and right eye alternately in for LED TV frames.
Page 166 Some file format may not supported the “2D → 3D.” “Side by Side” and “Top & Bottom” are available when the resolution is 720p, 1080i and 1080p in DTV, HDMI and USB mode or when set to PC and the PC is connected through an HDMI / DVI cable. “Vertical Stripe”, “Line by Line”...
Page 167 ● 3D Effect for LED TV preferred 3D viewing experience. 3D Effect (Auto – Auto: Automatically adjust the perspective and depth settings in accordance with the 3D input source. – Manual: Manually adjust the perspective and depth settings. ● 3D Perspective ●...
Page 168 ● → 2D (Off This function is deactivated when ● 3D Auto View (Off by Side” format HDMI signal with one of the resolutions below is automatically switched to 3D. If you set window appears when the TV receives a 3D signal. In this case, press the button because the TV does not switch to 3D.
Page 169 Support resolution (16:9 only) Resolution supported for HDMI PC mode ◀ The resolution for HDMI PC mode is optimized to 1920 x 1080 input. An input resolution other than 1920 x 1080 may not be displayed properly in 3D display or full screen mode. Resolution 1280 x 720p 1920 x 1080i...
Page 170 How to watch the 3D image ● Method 1 Some 3D modes may not be available depending on the format of the image source. To watch in 3D, wear 3D Active Glasses and press the power button on the glasses. 1.
Page 171 3. Use the and then press the 4. Using the control, select the you want to view. ◀ button to select Mode, button. ENTERE buttons on your remote 3D Mode of the image English 3D Mode Close ● The displayed image may differ depending on the model.
Page 172 ● Method 2 1. Press the 3D button on your remote. and then you can view the 2. If you want to change 3D options (such as on your remote, and then select Picture. 3. Go to Step 3 in the “Method 1”, and follow the directions from that point on. To exit the ◀...
Page 173 Supported formats and operating specifications for Standard HDMI 3D The 3D formats indicated below are recommended by the HDMI association and must be supported. Source signal format Standard HDMI 1.4 3D 1920 x 1080p @ 24 Hz x 2 1920 x 2205p @ 24 Hz 1280 x 720p @ 50 / 60 Hz x 2 1280 x 1470p @ 50 / 60 Hz ◀...
Page 174 For the Standard HDMI 3D format with 24Hz, the TV is optimized as follows: ● Resolution First Display Mode: If Standard, you can watch the video at a high resolution optimized to the resolution of the source video. ● Judder Reduction Display Mode: When Custom, you can watch a smooth picture without judder.
Page 175 Before using 3D function... NOTE ● mode is automatically disabled in following cases: when changing a channel or the input source, or accessing ● 3D Mode is set to its memorised configuration value automatically when you changing the input source. ●...
Page 176 ● 3D Active Glasses from Samsung’s previous product (IR type) or other manufacturers not be supported. ● When the TV is initially powered on, may take some time until the 3D display is optimized. ● The 3D Active Glasses may not work properly if there is any other 3D product or electronic devices turned on near the glasses or TV.
Page 177 ● Some files are not supported in the 2D to 3D function. ● Be sure to stay within the viewing angle and optimum TV viewing distance when watching 3D pictures. Otherwise, you may not be able to enjoy proper 3D effects. ●...
Page 178: Getting Started With Smart Hub
❑ Getting Started with SMART HUB Features ◀ Search Easily search and access content from diverse sources (e.g. applications, Your Video, AllShare). Your Video Enjoy your movie watching with a customized video on demand (VOD) recommendation service. * This feature is limited to certain regions English SOCIAL TV...
Page 179 For some of the countries listed, local language characters might not be displayed properly. Favourites Channel Photos Music ● The displayed image may differ depending on the model. English Samsung Apps Guide Record TV Web Browser Videos Schedule Manager Source Login...
Page 180: Screen Display
Samsung Apps Application service: You can experience various service by provided samsung. Recommended Applications: Displays the recommended service by Samsung. You are not able to add or delete a Web Browser Videos service in this list. Installed Applications list: Displays the installed...
Page 181 NOTE ● Configure the network settings before using information, refer to ● Unsupported fonts within the provider’s content will not display normally. ● Slow responses and/or interruptions may occur, depending on your network conditions. ● Depending on the region, English may be the only language supported for application services.
Page 182 ● If you experience a problem using a application, please contact the content provider. ● According to circumstances of the contents provider, an application’s updates or t he application itself may be discontinued. ● Depending on your country’s regulations, some applications may have limited service or not be supported.
Page 183 Account Login For an application with multiple accounts, select to access the different accounts. For a more enjoyable application experience, register and log in to your account. For instructions on creating an account, refer to “How to create an ◀ Smart TV ID”.
Page 184 1. Press the Red button in the 2. Select by pressing the If you want to create an account, select account OSD window will appear. 3. Select the desired 4. After selecting Smart TV When login succeeds, ◀ SMART HUB home page.
Page 185 How to create a Smart TV ID Before creating a Smart TV Samsung Apps. 1. Press the Red button. The Login screen appears. 2. Select Create Account. The 3. Press the ENTERE appear. ◀ 4. Using the keypad screen, enter a...
Page 186 Using the Keypad Pressing the you to change the text fields to lower case, capitalized case, upper case, numbers and icons. Using the Green ABC) You can use this Screen Keypad in a several Here is how to input characters using keypad of ABC type. ◀...
Page 187 4-3. Press the 1, 0 and 5 button in numerical order. 4-4. Press the numbers to upper case. 4-5. Press the 2 button on the remote 3 times to input C. 4-6. Press the upper case to lower case. 4-7. Press buttons on the remote to input the rest of “Chang”. When done, press ENTERE ◀...
Page 188 � in icon keypad screen. 6. Account created. You can use the services provided by all users of your Samsung TV with a single login by linking the users’ account to the TV ID. If you want to register a service site ID, select Yes. Service Site list will appear on the screen.
Page 189 7. Select Register of the Service Site you want, then press the 8. Using number buttons, enter your application site ID and password. Then press ENTERE button. 9. Registered successfully. If you add another service site, select Yes. then press the ENTERE button, go to step 5.
Page 190: Setting Up Smart Hub
❑ Setting up SMART HUB Settings ■ Configure SMART HUB screen. Highlight Settings buttons and press the ● Account Management Register Service ◀ information for service sites. Change Password: Change account password. Remove From TV Account Deactivate Account: Withdraw membership from settings from this using the ENTERE...
Page 191 ● Service Manager Ticker Autorun (Off powering on the TV. Ticker function allows you to view content from the current input source and ticker data at the same time. Depending on your country, not be supported. Channel Bound Service (Off ◀...
Page 192 ● Reset: Resets SMART HUB HUB, Enter password. SMART ● Properties More: Display information about Terms of Service ◀ settings to factory default settings. If you want reset SMART HUB. Agreement: Display the Terms of Service English Agreement. ▶...
Page 193: Using The Smart Hub Service
❑ Using the SMART HUB service Samsung Apps ■ Samsung Apps is a store for downloading applications to be used on Samsung TV / AV equipment. Users can enjoy a variety of contents such as videos, music, photos, games, useful information etc. using the downloaded applications.
Page 194 Using the colour buttons with the Samsung Apps. ● Red (Login): To log in to the internet service. ● Green (List View To change the view mode. ● Return: Moves to previous menu. ◀ What’s New? Video Game Sports Lifestyle...
Page 195 Using the Samsung Apps by category The following categories are available: ● What’s New?: Displays newly registered applications. ● Video: Displays various video media such as movies, TV shows and short length videos. ● Game: Displays various games such as sudoku and chess.
Page 196 Account: Displays the application list and your App cash balance. Starting in the middle of 2010 (US and Korea only), you can purchase cyber- cash for buying applications through tv.samsungapps.com. ● Help: If you have questions about ◀ Samsung Apps, check this section first. English ▶...
Page 197 Web Browser ■ (May not be available, depending on your country.) Using the function provided by the HUB, you can surf the Web Browser SMART Internet on your TV. ◀ ▶ English...
Page 198 When the Web Browser opens, the cursor is in Tab Mode. In Tab Mode, the cursor highlights text or objects, or surrounds them with a blue rectangle. To move the cursor in Tab Mode, use the scroll the screen You can change from Tab Mode to Pointer Mode by pressing the Yellow Use the arrow buttons to move the pointer.
Page 199 Web Browser icons, you can easily use the starting with the icon on the far left of the screen. ● Back: Moves to the previous web page. If there is no saved previous web page, this icon will not work. ●...
Page 200 Refresh / Stop: Refreshes the current page or stops the current connection from loading. Home: Goes to the URL you specified as your the home page. Zoom: You can select a zoom level of 50%, 75%, 100%, 125%, 150%, 200%, 400% Fit to Screen.
Page 201 When you highlight a page, the Options by selectng the Options button, and then pressing ENTERE. In the Options pop-up you can pages from the History list. URL: Shows the URL of the current page. If you press the URL pop-up appears. Press directly.
Page 202 Windows List: Displays images of open windows (the Windows List). You can add the current page to the list (using Add a new page), select and access a page in the list, select and close a page in the list, or close all pages. The selected page is the enlarged page in the Centre.
Page 203 Using the Coloured and function buttons with the Web Browser ● Red (Back): Moves to previous page. If there is no saved previous web page, this button will not work. ● Green (Zoom): You can select a screen size of 50%, 75%, 100%, 125%, 150%, 200%, ●...
Page 204 ● TOOLS (Options): Displays the icons from the top of the page in a toolbar in the middle of the screen. Press ● (Scroll Up ●  ● RETURN: Return to the previous screen or close the can also close the Browser by pressing the Setting up the Web Browser Press the TOOLS...
Page 205 ● Reading Tools: Provides an easy-to-read page by enlarging the main text. ● Clean Site: When registered in Clean appropriate web pages. Clean Site Feature (On Clean Site Password ◀ Clean Site is on, you can only access the web pages Site.
Page 206 ● Add Current Site: Lets you add the currently displayed web site to the Clean Site list. Clean Site Manage: Lets you key in URLs to add to the delete sites from the If you turn Clean Site List, you will not be able to access any Internet sites. ●...
Page 207 ● Option: You can configure homepage: You can set the home page. Set as Most visited: Set the most frequently visited URL as the home page. Current Page: Sets the current page as the home page. Enter address: Lets you key in the URL of the page you want for your home page.
Page 208 – Ad Blocker (On – Block current – Manage blocked Management should be blocked by directly keying in the URL, or you can delete a website from the list. General: You can delete your personal information. – Delete search ◀ –...
Page 209 Encoding: You can set the Encoding setting for webpages to Automatic or Manual. – Auto select (On automatically. – Settings: Select the Encoding settings for webpages manually. Select an encoding format from the encoding format list. Pointer: You can set the speed of the cursor when the cursor is set to Mode.
Page 210 Communicate with people around the world! Other company’s TV Cameras are not compatible with Skype on your TV. ◀ For more information, download the Skype user's manual from “www.samsung. com.” ● The displayed image may differ depending on the model.
Page 211 [Legal Statement] Due to the various capabilities of products featuring the Samsung SMART HUB - Content Service, as well as limitations in the available content, certain features, applications, and services may not be available on all devices or in all territories.
Page 212 IS WITH YOU. THE DEVICE AND ALL THIRD PARTY CONTENT AND SERVICES ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED. SAMSUNG EXPRESSLY DISCLAIMS ALL WARRANTIES AND CONDITIONS WITH RESPECT TO THE DEVICE AND ANY CONTENT ◀...
Page 213 ◀ ▶ device. Samsung may impose limits on the use of or access to certain services or content, in any case and without notice or liability. Samsung is neither responsible nor liable for customer service related to the content and services. Any question or request for service relating to the content or services should be made directly to the respective content and service providers.
Page 214: About Allshare
For more information, visit “www.samsung.com” or contact the Samsung call centre. Mobile devices may need additional software installation. For details, refer to each device’s user’s guide. ◀ If your Samsung TV connects to a non-Samsung DLNA server, a compatibility issue may occur during video playback. English ▶...
Page 215 By connecting your Samsung TV to a network via AllShare™, you can use Samsung’s original functions as follows: – Playback of various video formats (DivX, MP4, 3GPP, AVI, ASF, MKV, etc.) – Video thumbnail feature – Bookmark function (to resume video playback) –...
Page 216: Setting Up Allshare
❑ Setting Up AllShare™ → MENUm Network AllShare Settings ■ ● Media (On / Off): Enables or disables the media function. When the media function is on, Media contents play can be controlled by a mobile phone or other devices that support DLNA DMC. ◀...
Page 217 Media ■ Shows a list of mobile phones or connected devices which have been set up with this TV for using the The Media function is available in all devices which support DLNA DMC. ● Allowed / Denied: Allows/Blocks the the devices. ●...
Page 218 Using the Media Function An alarm window appears informing the user that the media contents (videos, photos, music) sent from a mobile phone will be displayed on your TV. The contents are played automatically 3 seconds after the alarm window appears. If you press the button when the alarm window appears, the media contents are not played.
Page 219 ● To turn off the media contents transmission from the mobile phone, set in the AllShare ● Contents may not be played on your TV depending on their resolution and format. ● ENTERE media content. ● Using the mobile device, you can control the media playing. For details, refer to each mobile’s user’s guide.
Page 220 How to play a media content saved on the connected device 1. Press the MENU Network, and then press the 2. Use the then press the 3. Use the button. 4. Set to On. Media ◀ 5. Specify the device containing the media content you want to play and select Allowed by using the button on your remote, use the ENTERE...
Page 221 6. Press the EXIT button. 7. Use the to select device. The Media Contents menu will open where you can play saved content on the selected device. 8. Select and play media content. For more detail information about Media Contents, refer to “Using the Media Contents” ◀...
Page 222: Anynet
What is Anynet+? Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.
Page 223 For the method of connecting external devices , refer to the supported user manual. NOTE ● Connect the Optical cable between the on your TV and the Digital Audio Input on the Home Theatre. ● The ARC function enables digital output of sound using the port and can only be operated when the TV is connected to an audio receiver that supports the ARC function.
Page 224 ● You can connect only one Home Theatre. ● You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions. ● Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
Page 225 Anynet+ Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV. Anynet+ Menu View TV Device List (device_name) MENU ◀ (device_name) TOOLS Description Changes Anynet+ mode to TV broadcast mode. Shows the Anynet+ device list. Shows the connected device menus.
Page 226 Description Anynet+ Menu (device_name) Shows the title menu of the connected device. E.g. If a DVD recorder is Title Menu connected, the title menu of the DVD recorder will appear. Depending on the device, this menu may not be available. Receiver Sound is played through the receiver.
Page 227: Setting Up Anynet
❑ Setting Up Anynet+ → MENUm System Anynet+ (HDMI-CEC) (Off ■ To use the Anynet+ Function, When the Anynet+ (HDMI-CEC) operations are deactivated. ◀ → Anynet+ (HDMI-CEC) / On) Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related English → ENTERE must be set to On.
Page 228 Auto Turn Off (No ■ Setting an Anynet+ Device to turn off automatically when the TV is turned off. Auto Turn Off time as the TV powers off. May not be enabled depending on the device. ◀ / Yes) is set to Yes, running external devices will turn off at the same English ▶...
Page 229: Switching Between Anynet+ Devices
❑ Switching between Anynet+ Devices 1. Press the TOOLS ENTERE button to select If you cannot find a device you want, select 2. Select a device and press the selected device. Device List in the ◀ button to select Anynet+ (HDMI-CEC). And then press the Device List.
Page 230 ● Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching operation. ● If you have selected external input mode by pressing the you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the ◀...
Page 231: Listening Through A Receiver
❑ Listening through a Receiver You can listen to sound through a receiver (i.e Home Theatre) instead of the Speaker. 1. Select Receiver 2. Press the EXIT If your receiver supports audio only, it may not appear in the device list. The receiver will work when you have properly connected the optical in jack ◀...
Page 232 When the receiver (i.e Home Theatre) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a DTV (Aerial) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the receiver.
Page 233 Using the ARC function You can listen to sound through a receiver connected HDMI cable without the need for a separate optical cable. 1. Select and set to On. Receiver 2. Press the EXIT button to exit. To use the ARC function, a receiver which supports the HDMI-CEC and ARC features must be connected to the ◀...
Page 234: Using The Media Contents
English Search Your Video Samsung Apps Connect to the Internet and enjoy a variety of contents throuth SMART HUB. This feature may not be available in some countries. For some of the countries listed, local language characters might not be displayed properly.
Page 235: Connecting A Usb Device
❑ Connecting a USB Device 1. Turn on your TV. 2. Connect a USB device containing recorded tv, photo, music and / or movie files to the port on the back or side panel of the 3. When USB is connected to the TV, popup window appears.
Page 236: Connecting To The Pc Through Network
❑ Connecting to the PC through network You can play pictures, music and videos saved on your PC through a network connection in the 1. For more information on how to configure your network, refer to “Setting the Network”. ● You are recommended to locate both TV and PC in same subnet.
Page 237 2. Using a LAN cable, connect between the external modem and the PC onto which the AllShare PC Software programme will be installed. ● You can connect the TV to the PC directly without connecting it through a Sharer (Router). Functions that are not supported when connecting to a PC through a network: ●...
Page 238 AllShare PC Software should be permitted by the firewall programme on your When you use on the functions of the provided server: ● The sorting method may vary. ● Scene Search ● The Resume, which resumes playing of a video, may not be supported. ◀...
Page 239 You may experience file stuttering while playing a video in through a network connection. Before using Media Contents functions... It might not work properly with unlicenced multimedia files. Need-to-Know List before using Media Contents ● MTP (Media Transfer Protocol) is not supported. ●...
Page 240 Devices should be connected directly to the TV’s USB port. ● Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss. ●...
Page 241 ● The maximum supported JPEG resolution is 15360X8640 pixels. ● For unsupported or corrupted files, the “Not Supported File Format” message is displayed. ● If the files are sorted by folder. ● If the number of files and folders saved on a USB storage device is approximately over 8000, the files and folders may not appear and some folders may not be opened.
Page 242 ● If more than 2 PTP devices are connected, you can only use one at a time. ● If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high power (more than 500mA or 5V) may not be supported.
Page 243 ● If the TV has been no input during time set in Screensaver will run. ● The power-saving mode of some external hard disk drives may be released automatically when connected to the TV. ● If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.
Page 244 Screen Display Move to the file you desired using the up / down / right / left buttons and then press ENTERE � Music Device name: Displays a connected device name. File List Section: You can confirm the files and ◀...
Page 245: Recorded Tv
If you format the device, all files will be deleted. Before formatting your device to the tv, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss.
Page 246 Timer Recording ■ SMART HUB Allows you to make a reservation to record a programme scheduled for broadcast. Set the current time first to use this function. Using the Timer Recording function (digital channels only) 1. Press the ENTERE screen will be displayed. Manager ◀...
Page 247 3. Press the We recommend using a of RAID type is not supported. A USB storage device cannot record until it completes the Performance 4. Press the Time Time. ◀ button to select the Timer with at least 5,400 rpm, but a USB HDD Test.
Page 248 To record a current broadcasting programme Allows you to record a programme currently being broadcasted. Set the current time first to use this function. 1. When you record a broadcast programme, press the remote to record. A pop up window will appear. We recommend using a USB HDD with at least 5,400 rpm, but a of RAID type is not supported.
Page 249 Using the Timeshift function If you missed a live broadcast, you can see from the recorded broadcast using this feature. 1. When you watch a broadcast programme, press the remote to start the 2. If you want to stop the remote.
Page 250 Timeshift After the Timeshift information will be fixed to “01:30:00”. Timeshift Timeshift Lock. ◀ mode operates for a maximum of 90 minutes. mode function has run for the maximum time, the time function is not supported for analogue channels. functions are disabled for channels locked with English Channel ▶...
Page 251 Before using the Timeshift and a record function... Recorded videos are DRM (digital rights management) protected and cannot be played on a PC or other TVs. Note that files saved on the TV cannot be used after the main board is changed. NOTE ●...
Page 252 ● If the 5% free memory space limit of the USB storage device is reached, the current recording process will be closed. ● When recording is performed by both the PVR (Personal Video Recorder) function and a device that supports the HDMI-CEC feature, recording by the PVR function takes precedence.
Page 253 ● If the USB device has failed the must go through the before you record with the ● Timeshift completed the ● If you attempt the recording or have the Device Performance ◀ Device Performance Device Format Guide or Channel. functions can only be used with a USB storage device that Device Performance Test.
Page 254 ● If you press being displayed or record with recording 1 or 2 seconds later than you intended due to the time needed to process the command. ● If any function that turns off the TV for a time that conflicts with recording, the TV will be turned off once the recording is complete.
Page 255 Playing Recorded TV Programme 1. Press the r /u 2. Press the ENTERE ● The selected file is displayed on the top with its playing time. ● During playing the recorded TV programme, you can search using the button. ● You can use ◀...
Page 256: Videos
❑ Videos Playing Video 1. Press the the desired file in the file list. 2. Press the ENTERE button. ◀ button to select button or (Play) � English 1:02:15 / 2:04:10 1:02:15 / 2:04:10 ● The displayed image may differ depending on the model.
Page 257 ● The selected file is displayed on the top with its playing time. ● If video time information is unknown, play time and progress bar are not displayed. ● During playing the video, you can search using the ● You can use ◀...
Page 258 In this mode, you can enjoy movie clips contained on a Game, but you cannot play the Game itself. ● Supported Subtitle Formats Name MPEG-4 time-based text SAMI SubRip SubViewer ◀ Micro DVD File extension .txt .smi .srt .sub .sub or .txt English Format HTML...
Page 259 ● Supported Video Formats File Extension Container *.avi *.mkv *.asf ◀ *.wmv *.mp4 Video Codec Resolution Divx 3.11 / 4.x / 5.1 / 6.0 1920x1080 H.264 BP / MP / HP 1920x1080 MPEG4 SP / ASP 1920x1080 Motion JPEG 1920x1080 Divx 3.11 / 4.x / 5.1 / 6.0 1920x1080 H.264 BP / MP / HP...
Page 260 File Extension Container *.3gp 3GPP *.vro *.mpg *.mpeg ◀ *.ts *.tp *.trp Video Codec Resolution H.264 BP / MP / HP 1920x1080 MPEG4 SP / ASP 1920x1080 MPEG1 352x288 MPEG2 1920x1080 MPEG1 352x288 MPEG2 1920x1080 H.264 1920x1080 MPEG2 1920x1080 H.264 1920x1080 1920x1080 English...
Page 261 Video Decoder • Supports up to H.264, Level 4.1 • H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported. • MPEG4 SP, ASP: − Below 1280x720: 60 frame max − Above 1280x720: 30 frame max •...
Page 262 Other Restrictions NOTE ● Video content will not play, or not play correctly, if there is an error in the content or the container. ● Sound or video may not work if the contents have a standard bitrate / frame rate above the compatible Frame / sec listed in the table above.
Page 263 Using the Play Continuously Function (Resume Play) If you exit a movie when it is playing, you can play the movie later from the point where you stopped it. function does not support multiple users. (It will have only memorised Resume the point where the most recent user stopped playing.) 1.
Page 264 Section Repeat 1. Select the recorded one you want to play continuously by pressing the button to select it from the file list. 2. Press the (Play) / � A triangle icon will appear on the progress bar when the playback starts. 3.
Page 265 Using the Scene Search If you want to use the during playback, you can explore scene divided in to 5 chapters you want. If the index information is damaged or unsupported, you will not be able to use the Scene Search function. ◀...
Page 266 1. Select the movie file you want to play from the file list section. 2. press the (play) or � 3. Press the TOOLS Search. A pop up window appears. 4. Press the button to select a scene you want search. The playback will start from the selected scene.
Page 267: Music
Music ❑ Playing Music 1. Press the desired music file in the file list. 2. Press the ENTERE button. ● During playing the music, you can search ◀ using the (FF) and µ button to select the button or (Play) �...
Page 268 Only displays the files with MP3 extension. Other file extensions are not displayed, even if they are saved on the same USB device. If the sound is abnormal when playing MP3 files, adjust the Sound menu. (An over-modulated MP3 file may cause a sound problem.) ◀...
Page 269 Creating My Playlist SMART HUB 1. On the Music screen in the to select Edit 2. Press the ENTERE button. The check box appears to the left of the selected files. ◀ To select all the files in the current page, select top.
Page 270 4. Press the ENTERE is displayed. 5. The newly created or updated playlist will be in the main Playing My Playlist Select the My Playlist select a different music file within the play list. To delete a file from ◀ want to delete by using the direction buttons.
Page 271: Smart Hub
Playing the selected music files 1. On the Music screen in the menu, press the Edit Mode, and then press the button. 2. Press the the desired music file in the file list, and then ENTERE button. ◀ SMART HUB button to select ENTERE button to select...
Page 272 NOTE ● The check box mark appears to the left of the selected files. ● To select all the files in the current page, select top. ● To cancel a selection, press the 3. Press the play. ◀ ENTERE button to select Play. The selected music files will be English Select All in this page at the...
Page 273: Photos
Photos ❑ Viewing a Photo (or 1. Press the desired file in the file list. 2. Press the ENTERE ● When you press the in the file list, slide show will be started ◀ immediately. Slide Show) button to select the button.
Page 274 ● All files in the file list section will be displayed in the slide show. ● During the slide show, files are displayed in order from currently being shown. Music files can be automatically played during the slide show if the Music is set to On.
Page 275: Media Contents - Additional Function
❑ Media Contents - Additional Function Sorting the file list To sort files in the file list, select the button. And then press the Category Operations Default Default is sorted by Title without Group. ◀ Displays the whole folder. You can view the Folder View file name and thumbnail by selecting the folder.
Page 276 Category Operations Earliest Date Sorts and shows files by the earliest date. Sorts the music file by artist in alphabetical Artist order. Sorts the music file by album in alphabetical Album order. Genre Sorts music files by the genre. ◀ Sorts and shows photo files by month.
Page 277 Videos / Music / Photos Play Option menu The following functions are enabled during playback. Category Operations List Return to the file list. Play A movie file will begin to play from where it was stopped. continuosly You can start or pause a video or music file. ◀...
Page 278 Category Operations Set files you watch frequently as Edit Favourites favourites. You can use the Scene Search during playback to view or start a movie from the scene of your choice. Title Search You can move directly to another Title. You can search the movie using Time Search buttons at intervals of 1 minutes.
Page 279 Category Operations You can adjust the picture size to your Picture Size preference. Sound Mode You can change the Picture Mode You can change the You can view a subtitle. You can select Subtitle a specific language if the subtitle file contains multiple languages.
Page 280 Category Operations Previous Next Go to previous / next photo file. Displays the Subtitle Setting up a subtitle option. Start Slide You can start or stop a slide show. Show Stop Alternatively, the Slide Show remote can be used. You can select the slide show speed during the slide show.
Page 281 Category Operations Background You can start or stop a background music. Music On Background You can set and select background music Music Setting when watching a photo file or slide show. You can zoom into images in full screen Zoom mode.
Page 282: Other Information
■ Data Service Allows the user to use information (text, still images, graphics, documents, software, etc.) transmitted via broadcast media. Auto Run Data Service (On / Off) Sets whether or not to automatically run data service. automatically runs data service without user intervention. If any other secondary function is under way, ◀...
Page 283 Using Data Service If the channel you are currently watching provides data service, you can enjoy a variety of data services by pressing the Provided Data Service information may vary depending on broadcast. While using data service, changing the channel using the numeric buttons may not be possible depending on the service.
Page 284 2. Press the red button. The data service screen will be displayed. 3. Move to a desired option by pressing the service screen and then press OKE. The selected service will be started. If a Colour button of a certain function appears on the screen, you can use the offered function by pressing the corresponded button.
Page 285: Main Data Service Buttons And Their Functions
Main Data Service buttons and their functions Button Operation for Italy red button. Displays the Data Service list and immediately starts Data Service. (Data Service) BACKR Returns to the previous screen. Perform functions corresponding to each Colour button image displayed on the screen during Data Service.
Page 286 Button Operation Switches to teletext mode or Returns to the previous screen. TEXT Operations may differ depending on the service provider. Moves the Runs a selected item. EXIT Stops a running ◀ Data Service menu up, down, left and right. Data Service.
Page 287 HbbTV for France / Germany You will be able to access services from entertainment providers, online providers and CE manufactures through the HbbTV. This service may be supported in other countries. Some broadcating may not support the HbbTV. 1. HbbTV is turned off by default. To use HbbTV, go to and set it On.
Page 288 5. If the current channel is compatible with both the HbbTV and non-HbbTV text- input modes, activate TTX by pressing the TTX key twice. ● When the screen indicates (with the red button, etc.) that HbbTV is being accessed ● Press the TTX button once to enter the HbbTV text-input mode.
Page 289: Troubleshooting
❑ Troubleshooting ■ Troubleshooting for Problem Some application contents only appear in English. How can I change the language? Some application services do not ◀ work. When a network error occurs, I can only use the setting menu. SMART HUB Possible Solution The Application content language may be different from the application user interface language.
Page 290 Web Browser ■ 1. To open Browser, press the Browser, and then press the displayed differently with PC. 2. The Web Browser 3. When attempted to download a file, but the file could not be saved and an error message appeared. 4.
Page 291 7. Scrolling a web page that allows only part (and not the whole) of the page to be scrolled may cause corrupted characters. 8. ActiveX is not supported. 9. Some options cannot be accessed in Tab mode. (To access such options, switch to Pointer mode.) 10.
Page 292 13. Copy and Paste are not supported. 14. When writing emails or posting messages, some functions (Such as changing the size or colours.) may not be supported. 15. The number of bookmarks and logs that can be saved is limited. 16.
Page 293 22. If you import the bookmark file to a Computer from a TV, the bookmark file will be saved in “Samsung SmartTV Bookmark” folder. 23. If the time is not set in the menu (System → Time → Clock), the history ◀...
Page 294 24. Visited web site history is saved in chronological order and It will be removed from the list according to oldest page accessed. 25. Some video or audio content may not play during Flash playback depending on the video / audio codec supported. 26.
Page 295: Troubleshooting For Anynet
■ Troubleshooting for Anynet+ Problem Anynet+ does not work. ◀ Possible Solution • Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. • Only one receiver (home theatre) can be connected. • Check if the Anynet+ device power cord is properly connected. •...
Page 296 Problem I want to start Anynet+. I want to exit Anynet+. The message “Connecting to Anynet+ device...” appears on ◀ the screen. The Anynet+ device does not play. Possible Solution • Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) Setup menu.
Page 297 Problem The connected device is not displayed. ◀ The TV sound is not output through the receiver. Possible Solution • Check whether or not the device supports Anynet+ functions. • Check whether or not the HDMI cable is properly connected. •...
Page 298 If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www. samsung.com” then click on Support, or contact the call centre listed on the back-cover of this manual.
Page 299 Issues The TV image does not look as good as it did in the store. ◀ Solutions and Explanations • If you have an analogue cable / set top box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD (high definition) picture quality.
Page 300 Issues The picture is distorted: macro block error, small block, dots, pixelization Colour is wrong or missing. ◀ Solutions and Explanations • Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action movies. •...
Page 301 Issues There is poor colour or brightness. There is a dotted line on the edge of the screen. The picture is black and white. ◀ Solutions and Explanations • Adjust the Picture options in the TV menu (go to Colour Brightness / Sharpness) •...
Page 302 Issues When changing channels, the picture freezes or is distorted or delayed. Sound Quality There is no sound or the sound is too low at maximum volume. ◀ Solutions and Explanations • If connected with a cable / set-top box, please try to it. Reconnect the AC cord and wait until the cable / set-top box reboots.
Page 303 Issues The picture is good but there is no sound. ◀ Solutions and Explanations • Set the Speaker Select option to • If you are using an external device, make sure the audio cables are connected to the correct audio input jacks on the TV. •...
Page 304 Issues The speakers are making an inappropriate noise. No Picture, No Video The TV won’t turn on. ◀ Solutions and Explanations • Check the cable connections. Make sure a video cable is not connected to an audio input. • For antenna or cable connections, check the signal strength. Low signal level may cause sound distortion.
Page 305 Issues The TV turns off automatically. There is no picture/Video. ◀ Solutions and Explanations • Ensure the Sleep Timer is set to • If your PC is connected to the TV, check your PC power settings. • Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
Page 306 Issues RF (Cable / Antenna) Connection The TV is not receiving all channels. The picture is distorted: macro block error, small block, dots, ◀ pixelization. PC Connection A “Mode Not Supported” message appears. Solutions and Explanations • Make sure the Antenna cable is connected securely. •...
Page 307 Issues “PC” is always shown on the source list, even if a PC is not connected. The video is OK but there is no audio. Network Connection The wireless network connection failed. ◀ Solutions and Explanations • This is normal; “PC” is always shown on the source list, regardless of whether a PC is connected.
Page 308 Issues Recording / Timeshift The USB device is not recognized or a Device Format, Checking Device Device Performance Test fails. ◀ A message prompts me to format a USB device that has been working well. Solutions and Explanations • See the manual for the USB device to check that the USB device supports recording.
Page 309 Issues The recording function does not work. Timeshift Mode does not work. ◀ Solutions and Explanations • Check that a USB device is connected. • Check that the channel is a recordable digital channel. • If the signal is weak or does not exist, the recording function will automatically be closed.
Page 310 Issues A message indicates a performance test failure, and the recording and Timeshift Mode functions do not work. A scheduled recording has failed. ◀ Solutions and Explanations • These problems may occur if you use a low-performance USB device that does not support recording. We recommend using a USB HDD with at least 5 400 rpm, but a USB HDD of RAID type is not supported.
Page 311 Issues Several recording devices are connected but the TV stopped recording. Others The picture won’t display in full screen. ◀ Solutions and Explanations • If multiple recording devices are connected and the device set as Default Recording Device has no free memory space, the recording function will be closed.
Page 312 Try pointing the remote directly at the TV from 5~6 feet away. • Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set user manual for the SAMSUNG TV code. • Check the supported resolution of the TV, and adjust the external device’s output resolution accordingly.
Page 313 Issues The TV Signal Information unavailable in the Self Diagnosis menu. The TV is tilted to the side. There are difficulties assembling the stand base. The channel menu is greyed out. (unavailable) ◀ Solutions and Explanations • This function is only available with digital channels from an Antenna / RF/Coax connection.
Page 314 Issues Your settings are lost after 30 minutes or every time the TV is turned off. You have intermittent loss of audio or video. ◀ Solutions and Explanations • If the TV is in the Store Demo settings every 30 minutes. Change the settings from mode in the Plug &...
Page 315 Issues You see small particles when you look closely at the edge of the frame of the TV. menu is not available. The message “Scramble signal” or “Weak Signal/No Signal” appears. ◀ You turned the TV off 45 minutes ago, and it turned on again.
Page 316 You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.com → Support → Downloads) by USB. ◀ Solutions and Explanations •...
Page 317: Connecting To A Common Interface Slot
❑ Connecting to a COMMON INTERFACE slot Attaching the CI Card Adaptor ■ Attach the adapter as shown below. To connect the CI CARD Adapter, follow these steps. We recommend attaching the adapter before installing 1. Insert the CI CARD Adapter into the two holes on the product 1 . ◀...
Page 318 2. Connect the CI CARD Adapter into the product 2 . 3. Insert the “CI or CI+ CARD” We recommand that you insert the CI card before you mount the TV on a wall. It may be difficult to insert after the mounting. Insert the card after attaching the CI-Module on TV. It is difficult to attach the module if you insert the card before attaching.
Page 319 Using the “CI or CI+ CARD” ■ To watch paid channels, the “CI or CI+ CARD” must be inserted. ● If you don’t insert the “CI or CI+ CARD”, some channels will display the message “Scrambled Signal”. ● The pairing information containing a telephone number, the “CI or CI+ CARD”...
Page 320 NOTE ● You must obtain a “CI or CI+ CARD” from a local cable service provider. ● When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage to it. ●...
Page 321 ● “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer. ● If you have any problems, please contact a service provider. ● Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be seen.
Page 322: Teletext Feature
❑ Teletext Feature (depending on the country) The index page of the Teletext service gives you information on how to use the service. For Teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed.
Page 323 Activates the Teletext mode for the current channel. Press the button twice to overlap the Teletext mode with the current broadcasting screen. Press it one more time to exit (Teletext on / mix / teletext. off) Stores the Teletext pages. (store) Displays the teletext on the upper half of the screen in double-size.
Page 324 Colour buttons (red, If the FASTEXT system is used by the broadcasting company, the different topics on a green, yellow, blue) Teletext page are colour-coded and can be selected by pressing the coloured buttons. Press the colour corresponding to the topic of your choice. A new colour coded page is displayed.
Page 325 Displays the next Teletext page. (page up) Displays the previous Teletext page. (page down) Displays the index (contents) page at any time while you are viewing Teletext. (index) Displays the hidden text (answers to quiz games, for example). To display the normal screen, press it again.
Page 326 Typical Teletext page Part Contents Selected page number. Broadcasting channel identity. ◀ Current page number or search indications. Date and time. Text. Status information. FASTEXT information. English ▶...
Page 327: Anti-Theft Kensington Lock
❑ Anti-theft Kensington Lock The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the illustration depending on the manufacturer.
Page 328 To lock the product, follow these steps: 1. Wrap the Kensington Lock cable around a large, stationary object such as desk or chair. 2. Slide the end of the cable with the lock attached through the looped end of the Kensington Lock cable.
Page 329: Licence
❑ Licence TheaterSound, SRS and symbol are trademarks of SRS Labs, Inc. TheaterSound technology is incorporated under licence from SRS Lab, Inc. Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under licence under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;...
Page 330 Trademark: Rovi and Rovi On Screen Guide are trademarks of Rovi Corporation and / or its subsidiaries. Licence: The Rovi On Screen Guide system is manufactured under licence from Rovi Corporation and / or its subsidiaries. Patent: The Rovi On Screen Guide system is protected by patents and patent applications filed in the US, Europe, and other countries including one or more of the United States patents 6,396,546;...
Page 331 DivX Certified® to play DivX® video up to HD 1080p, including premium content. DivX®, DivX Certified® and associated logos are trademarks of DivX, Inc. and are used under licence. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified® device that plays DivX video.
Page 332: E-Manual Guide
❑ How to view the e-Manual You can read the introduction and instructions about the TV features stored in your TV. → MENUm Support ENTERE → → e-Manual English Basic Features Changing the Preset Picture Mode Adjusting Picture Settings Changing the Picture Size Changing the Picture Options Setting up the TV with Your PC Help...
Page 333 Screen Display Current on-air broadcasting. ◀ Help: Displays the Guide Press ENTERE Basic Features Changing the Preset Picture Mode Adjusting Picture Settings Changing the Picture Size Changing the Picture Options Setting up the TV with Your PC Help e-Manual Product Guide.
Page 334 Using the Help Display the e-Manual Guide & the Product Guide by pressing Help. ❑ How to view the e-Manual You can read the introduction and instructions about the TV features stored in your TV. MENUm → Picture → Picture Mode →...
Page 335 How to toggle between the e-Manual and the corresponding menu(s). Basic Features > Changing the Preset Picture Mode (1/1) ❑ Changing the Preset Picture Mode MENUm → Picture Picture Mode ■ Select your preferred picture type. When an input source is set to PC, the Standard and Entertain.
Page 336 Viewing the Contents ◀ Basic Features > Changing the Preset Picture Mode (1/1) ❑ Changing the Preset Picture Mode MENUm → Picture Picture Mode ■ Select your preferred picture type. When an input source is set to PC, the available the Standard ◀...
Page 337 Using the Zoom mode When you view the e-Manual instruction, select Zoom to magnify the screen. You can scroll through the magnified screen by using the buttons. To return to the previous screen, press the RETURN button. ◀ ❑ Changing the Preset Picture Mode →...
Page 338 How to search a keyword by using index page 1. If you want to search a keyword, select 2. Press the ENTERE 3. Press the ENTERE 4. You can view the corresponding e-Manual instruction screen. To close the ◀ button to select a character order you want, and then press button.

Samsung UE40D7000LU E-Manual

Quick Links

Troubleshooting

Related Manuals for Samsung UE40D7000LU

Summary of Contents for Samsung UE40D7000LU

This manual is also suitable for:

Table of Contents