Operation Panel; Functions Of Buttons - Clarion VX807AU Owner's Manual

4. OPERATION PANEL

[VOICE]
[IR]
Only navigation map card is available and don't remove it when unit is powered on

Functions of Buttons

[MAP] Button
• Press this button to move to the Native Navigation
screen.
• Press and hold this button for 2 seconds to move to
Apple CarPlay map.
[AV] Button
• Press this button to display the current audio source
screen.
[MENU] Button
• Press this button to display main menu; press again
to return current source.
• Press and hold this button for 2 seconds to turn off
the monitor. Press anywhere on the touch screen to
turn on the monitor again.
[RESET] Button
• Press this button to hardware reset the unit.
Note:
When the [RESET] button is pressed, frequencies of radio
stations, titles, etc. stored in memory are cleared.
[IR] SENSOR
• Receiver for the remote control unit (operating range:
30 degree in all directions).
VX807AU
[MENU] [MAP]
[RESET] [AV] [-VOL+]
[VOICE] Button
• Press this button until you hear the tone, then you
®
can use Siri function.
[Open/Tilt] Button
• Press this button to open and close the panel.
• Keep pressing this button more than 2 seconds in
order to change the tilt angle.
[-VOL+] Button
• Press these buttons to increase or decrease the
volume level.
• Keep pressing one of these buttons for more than 2
seconds to quickly increase or decrease the volume
level.
Micro SD card slot (Navigation ONLY)
When open the front panel, micro SD card slot
appears. Only for Clarion navigation map card. (Sold
separately) Inserting anything other than specific
navigation card may cause damage to the unit or your
media.
[Open/Tilt]
VX807AU
11