Display Information; Programming Tracks/Chapters - Philips AJL 700 User Manual

Display information

During playback, press DISPLAY on the
remote control repeatedly to select your display
options:
CDs/VCDs:
SINGLE ELAPSED - elapsed playback time
of current track.
SINGLE REMAIN - remaining time of current
track.
TOTAL ELAPSED - elapsed playback time of
disc.
TOTAL REMAIN - remaining playback time of
disc.
DVDs:
TITLE ELAPSED - elapsed playback time of
current title.
TITLE REMAIN - remaining time of current
title.
CHAPTER ELAPSED - elapsed playback
time of current chapter.
CHAPTER REMAIN - remaining time of
current chapter.
**Options available subject to type of disc. Not
available for MP3-CDs.
DVD
ERASE/WRITE
1
2
●
3
4
●
AV
●
SHUFFLE
●
Disc Operations

Programming tracks/chapters

You can select and program 20 tracks/ chapters
for playback. If you like, store any track/chapter
more than once.
CDs/VCDs/DVDs:
Press PROG to activate programming mode.
➜
The program pop-up appears for you to
enter the desired track/chapter numbers.
Use the navigation controls 1 / 2 / 3 / 4
on the remote control to select your desired
program position.
If you need to go the next /previous page to
continue programming, navigate to highlight
4 / ¢.
Use the Numeric Keypad (0-9) on the
remote control to enter your desired track/
chapter number (in 2 digits)
E.g. Track/chapter 7, press 0 and then, 7.
To start playback, navigate to highlight START.
If necessary, press ENTER/ OK to confirm.
Erasing the program
Either:
Press PROG again, or
Use the navigation controls 1 / 2 / 3 / 4 to
highlight EXIT.
➜
The program pop-up disappears.
23