TV
Watching TV
1
Check your TV set has been properly connected
and placed. (see Installation, Connecting TV
antenna/CATV and Using the TV Screen)
2
On the remote control, press B
press TV once or more to select TV or CATV
mode (or on the set, POWER and SOURCE).
3
In CATV, press ENTER on the remote control
to select HRC, IRC, STD or AUTO mode.
DVD
ERASE/WRITE
4
The first time you use the TV, press AUTO
PROG /RADIO PROG on the set.
➜
Channel number starts running.
➜
Available channels are programmed.
➜
After all channels are stored, the first
autostore channel will then automatically play.
1ALL
SHUFFLE PROG.
TV
FM
AM
TIMER
EJECT
CLOCK/TUNING
CLK/DISP
PRESET
MEM
VOL.
MHZ
kHZ
AJL700 KITCHEN DVD PLAYER
AUTO PROG/
PRESET - /
PRESET+ /
RADIO PROG
CH. DOWN
CH. UP
BAND
DSC
MUTE
18
5
Press PRESET - / CH.DOWN, PRESET + /
CH.UP to select your desired channel (on the
remote control, 3 , 4)
or
B
B to on, then
B
B
Use the Numeric Keypad (0-9) on the
remote control to select the channel number
directly. e.g.
Channel 2: Press 0 and then, 2
Channel 10, Press 1 and then, 0
To erase/ overwrite current presets
You can erase a preset channel by storing
another channel in its place.
1
Select the channel you want to erase.
2
On the remote control, press ERASE/ WRITE
once or more until ERASE appears
AV
➜The erased channel number appears in red.
3
Press ERASE/ WRITE again until ADD
SHUFFLE
appears.
4
PROG
Use the Numeric Keypad (0-9) on the
remote control to enter your desired channel
number
➜
TIMER
PRESS TO
START / STOP
VOLUME
The stored channel number appears in green.