Table of Contents
Advertisement
Troubleshooting
Problem
No transmission
Weak batteries
while pressing
Incorrect battery polarity
the PTT Button
Weak or no
Weak batteries
signal received
Channel
not set the same
as target transceiver
Volume level too low
PTT Button inadvertently
depressed
Excessive radio interference
on a particular channel
Obstruction of radio signal
Unit beeps, but
Batteries extremely
will not function
discharged
when turned on
Reception of
Interference from
unwanted
electronic devices such
signals
as computers or TVs
Possible cause
15
Correction
Replace batteries
Install the batteries using
the directions for correct
battery installation.
Replace batteries
Adjust the transceiver's
settings to match those
settings of the target
transceiver
Increase volume level
Release PTT Button
Change to a different
channel
Avoid operating in or near
large buildings or vehicles
Replace batteries
Turn the devices off or move
farther away from them.
128-7005
15 of 20
Advertisement
Table of Contents
