Hanna Instruments HI 98188 Instruction Manual page 36

The following table lists the specific range parameters:
Item Description
Calibr. Number of days after
Timeout Calibration warning
(EC, NaCl) is displayed
Out cal Display warning if the
range check reading is too far from the
(EC range calibration points
only)
Temperature Temperature
source entry mode
Temperature
compensation
mode
Range select Fix one
specific range
Cell constant Manual set of
the cell constant
Temperature Set the coeficient
coeficient for linear temperature
compensation
Temperature Reference temperature 15 °C, 20 °C, 25 °C
Ref
Temperature unit
TDS factor
Valid value Default
Disable, 1 to 7 days Disable
Enable/Disable Disable
Probe/Manual
No TC, Linear
Non Linear
Automatic, Fix one Automatic
resolution of
EC or resistivity range
0.010 to 10.000 1.000
0.00 to 10.00 %/°C 1.00 %/°C
°C or °F
0.40 to 1.00
36
Probe
No TC
25 °C
°C
0.50